Results for tag "bowls"

2 Articles
1_X_Keihin_Pwk_Billet_Aluminum_Carb_Carburetor_Bowls_Oversized_Version_2_Update_01_gi

1 X Keihin Pwk Billet Aluminum Carb Carburetor Bowls Oversized Version 2 Update

1 X Keihin Pwk Billet Aluminum Carb Carburetor Bowls Oversized Version 2 Update
1 X Keihin Pwk Billet Aluminum Carb Carburetor Bowls Oversized Version 2 Update

1 X Keihin Pwk Billet Aluminum Carb Carburetor Bowls Oversized Version 2 Update
XUpdated Version 2.0! – Stainless Overflow Tube In Stock Position, Oversized Bowl Nut To Be Able To Swap Both Main And Pilot Jet Without Removing Entire Bowl! This Is For 1 Xbowl For Any Size Aftermarket Oversized Keihin Pwk Carburetors Fits: All Pwk Series: 28Mm 33Mm 35Mm 36Mm 38Mm 39Mm Both Standard And Air Striker If You Have A Large Motor That Needs A Lot Of Gas Fast, You Need These So You Wont Suck The Stock Bowls Dry And Harm Your Motor – Lightweights 7 Ounces Each Without Hardware! – Higher Fuel Capacity (Ultra Capacity) – Designed To Clear The Clutch Arm – Includes All O-Rings, Power Jet Fittings (And Plugs If You Don’t Use Powerjets), And All Stainless Fasteners To Install – These Are A Must For Alcohol Carbs On A Yamaha Banshee, And Highly Recommended For Big Motors On Gas! Our mission is to provide you with the best products and the best service in the industry. We understand that sometimes, customers change their minds about products that they order or simply do not need them anymore. We also know that customers are cautious about Return Policies since they are often tricky and misleading. The following rules apply to new items. Products must be in original packaging and in a new and resalable condition. Any product that was used or fully/partially installed is non-returnable. We will do our best to solve your problem as quickly as possible. The item “1 X Keihin Pwk Billet Aluminum Carb Carburetor Bowls Oversized Version 2 Update” is in sale since Wednesday, May 15, 2019. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Intake & Fuel Systems\Carburetors & Throttlebodies”. The seller is “minkia38″ and is located in Ray, Michigan. This item can be shipped worldwide.
  • Brand: Motor City ATV
  • Warranty: 30 Days
  • Manufacturer Part Number: ACKEIHINFB
  • Part Number: ACKEIHINFB
  • Part Brand: Keihin
  • Fits: ATV

1 X Keihin Pwk Billet Aluminum Carb Carburetor Bowls Oversized Version 2 Update
2_x_KEIHIN_PWK_billet_aluminum_carb_carburetor_bowls_OVERSIZED_Version_2_update_01_jykm

2 x KEIHIN PWK billet aluminum carb carburetor bowls OVERSIZED Version 2 update

2 x KEIHIN PWK billet aluminum carb carburetor bowls OVERSIZED Version 2 update
2 x KEIHIN PWK billet aluminum carb carburetor bowls OVERSIZED Version 2 update
2 x KEIHIN PWK billet aluminum carb carburetor bowls OVERSIZED Version 2 update
2 x KEIHIN PWK billet aluminum carb carburetor bowls OVERSIZED Version 2 update
2 x KEIHIN PWK billet aluminum carb carburetor bowls OVERSIZED Version 2 update
2 x KEIHIN PWK billet aluminum carb carburetor bowls OVERSIZED Version 2 update
2 x KEIHIN PWK billet aluminum carb carburetor bowls OVERSIZED Version 2 update
2 x KEIHIN PWK billet aluminum carb carburetor bowls OVERSIZED Version 2 update

2 x KEIHIN PWK billet aluminum carb carburetor bowls OVERSIZED Version 2 update
This is the straight fitting head between the carbs not the angle fitting head. Angle fitting head is in another listing. XxxxNO DOMES IN THIS SALExxxx use current style domes from Noss or anyone else. CHARIOT BANSHEE DM & CHEETAH ONLY HEAD (does NOT fit stock or cub cylinders) FINE MILLED BARE ALUMINUM FINISH!!! We addressed a severe flaw in the design of DM and Cheetah Heads. 002 of space in between the dome and cylinder which will never be clamped on. The thicker dome will be clamped on but not the thinner. The problem here is obvious. Look at most any DM or Cheetah cylinder and you will see after removing the head black ring past the oring at the center stud. This is because compression lifts the dome there and escapes. Our design solves this issue. Our center is a floating piece of thick aluminum which will clamp on two uneven domes on the center stud. Another problem addressed is the restriction inside the angle fitting from CP. If you look in the fitting you will see the casting for the bolt hole protrudes into the bore and blocks 20% or more of the flow. Included in the sale is the head with all the fittings needed. This one has straight fitting on carb side. You can use Noss domes or any other dome that fits a DM Head. Old style cheetah domes from Trinity will NOT work. Our mission is to provide you with the best products and the best service in the industry. We understand that sometimes, customers change their minds about products that they order or simply do not need them anymore. We also know that customers are cautious about Return Policies since they are often tricky and misleading. The following rules apply to new items. Products must be in original packaging and in a new and resalable condition. Any product that was used or fully/partially installed is non-returnable. We will do our best to solve your problem as quickly as possible. The item “2 x KEIHIN PWK billet aluminum carb carburetor bowls OVERSIZED Version 2 update” is in sale since Monday, October 28, 2013. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Intake & Fuel Systems\Carburetors & Throttlebodies”. The seller is “minkia38″ and is located in Ray, Michigan. This item can be shipped worldwide.
  • Brand: Motor City ATV
  • Warranty: 30 Days
  • Manufacturer Part Number: ACKEIHINFB2K
  • Part Number: ACKEIHINFB2K
  • Part Brand: Keihin
  • Fits: ATV

2 x KEIHIN PWK billet aluminum carb carburetor bowls OVERSIZED Version 2 update