https://pwkcarburetorcarb.com Thu, 22 Oct 2026 07:45:41 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://pwkcarburetorcarb.com/2026/10/11/2001-suzuki-rm125-oem-mikuni-tmx38-38mm-carburetor-carb-13200-36f00-rm-125/ https://pwkcarburetorcarb.com/2026/10/11/2001-suzuki-rm125-oem-mikuni-tmx38-38mm-carburetor-carb-13200-36f00-rm-125/#comments Sun, 11 Oct 2026 07:23:37 +0000 https://pwkcarburetorcarb.com/2026/10/11/2001-suzuki-rm125-oem-mikuni-tmx38-38mm-carburetor-carb-13200-36f00-rm-125/ Mikuni TMX 38mm Carburetor New.]]>



Mikuni TMX 38mm Carburetor New.

]]> https://pwkcarburetorcarb.com/2026/10/11/2001-suzuki-rm125-oem-mikuni-tmx38-38mm-carburetor-carb-13200-36f00-rm-125/feed/ 0 https://pwkcarburetorcarb.com/2026/09/25/suzuki-250-500-quadracer-lt500r-quadzilla-lt250r-tmx-38-mikuni-carburetor-carb/ https://pwkcarburetorcarb.com/2026/09/25/suzuki-250-500-quadracer-lt500r-quadzilla-lt250r-tmx-38-mikuni-carburetor-carb/#comments Fri, 25 Sep 2026 06:50:39 +0000 https://pwkcarburetorcarb.com/2026/09/25/suzuki-250-500-quadracer-lt500r-quadzilla-lt250r-tmx-38-mikuni-carburetor-carb/ Mikuni TMX 38mm Carburetor New.]]>



Mikuni TMX 38mm Carburetor New.

]]> https://pwkcarburetorcarb.com/2026/09/25/suzuki-250-500-quadracer-lt500r-quadzilla-lt250r-tmx-38-mikuni-carburetor-carb/feed/ 0 https://pwkcarburetorcarb.com/2026/09/14/2003-suzuki-rm125-rm-125-38mm-tmx-replacement-carburetor-carb-for-13200-36f00/ https://pwkcarburetorcarb.com/2026/09/14/2003-suzuki-rm125-rm-125-38mm-tmx-replacement-carburetor-carb-for-13200-36f00/#comments Mon, 14 Sep 2026 18:29:38 +0000 https://pwkcarburetorcarb.com/2026/09/14/2003-suzuki-rm125-rm-125-38mm-tmx-replacement-carburetor-carb-for-13200-36f00/ 38MM TMX REPLACEMENT CARBURETOR – 2-STROKE PERFORMANCE REPLACEMENT. This 38mm flat-slide TMX replacement carburetor is designed as an affordable replacement option for many 125cc and 250cc 2-stroke motorcycles originally equipped with a similar 38mm carburetor. Each carburetor comes with a baseline jetting setup of a #410 main jet and #40 pilot jet, providing a solid […]]]>



38MM TMX REPLACEMENT CARBURETOR – 2-STROKE PERFORMANCE REPLACEMENT. This 38mm flat-slide TMX replacement carburetor is designed as an affordable replacement option for many 125cc and 250cc 2-stroke motorcycles originally equipped with a similar 38mm carburetor. Each carburetor comes with a baseline jetting setup of a #410 main jet and #40 pilot jet, providing a solid starting point for most applications. Final jetting should always be adjusted for your specific engine, exhaust, intake, elevation, temperature, and fuel. Venturi / Bore: 38mm. Engine-Side Spigot OD: Approx. Airbox-Side Inlet OD: Approx. Designed to accept commonly available TM/TMX-style replacement jets. RM250: Select applications using compatible 38mm carburetor dimensions. YZ250: Select applications using compatible 38mm carburetor dimensions. WR125: Select 38mm applications. Some later-model motorcycles were originally equipped with a Throttle Position Sensor (TPS) on the factory carburetor. This replacement carburetor does not use a TPS. For applicable models, the motorcycle’s TPS electrical connector can be left unplugged and securely protected from dirt and moisture. This carburetor operates mechanically and does not require the TPS connection. This is a replacement carburetor and is not an OEM component. Please compare the listed dimensions with your original carburetor before ordering. Depending on the year and model, minor installation adjustments may be necessary. Some intake or airbox boots can be tight due to small differences in outside diameter. Gently warming the rubber boot can make installation easier. Throttle cable routing and adjustment should also be checked during installation. The installed #410 main and #40 pilot are intended as a baseline only. Carburetor jetting varies depending on exhaust system, air filter and airbox modifications, engine modifications, fuel/oil mixture, temperature, humidity, and elevation. Always verify jetting for your individual engine before extended or high-RPM operation. 1 x 38mm flat-slide replacement carburetor. #410 main jet installed. #40 pilot jet installed.

]]> https://pwkcarburetorcarb.com/2026/09/14/2003-suzuki-rm125-rm-125-38mm-tmx-replacement-carburetor-carb-for-13200-36f00/feed/ 0 https://pwkcarburetorcarb.com/2026/08/23/1990-suzuki-rm125-carburetor/ https://pwkcarburetorcarb.com/2026/08/23/1990-suzuki-rm125-carburetor/#comments Sun, 23 Aug 2026 05:43:42 +0000 https://pwkcarburetorcarb.com/2026/08/23/1990-suzuki-rm125-carburetor/ Looks to be all there. Safe to say, it probably could use a cleaning and lubing of parts. Only fault I noticed, the choke knob, the plastic is broken off in the carb housing and you would need to loosen up that choke, then coax the plastic out of the threaded area. We make no […]]]>











Looks to be all there. Safe to say, it probably could use a cleaning and lubing of parts. Only fault I noticed, the choke knob, the plastic is broken off in the carb housing and you would need to loosen up that choke, then coax the plastic out of the threaded area. We make no claims to function, originality or alteration, other than what is stated in description. If you have any detailed questions, please ask before purchasing.

]]> https://pwkcarburetorcarb.com/2026/08/23/1990-suzuki-rm125-carburetor/feed/ 0 https://pwkcarburetorcarb.com/2026/08/11/1994-suzuki-rm125-oem-original-keihin-pwk-36-carburetor-throttle-assembly-91-00/ https://pwkcarburetorcarb.com/2026/08/11/1994-suzuki-rm125-oem-original-keihin-pwk-36-carburetor-throttle-assembly-91-00/#comments Tue, 11 Aug 2026 05:19:44 +0000 https://pwkcarburetorcarb.com/2026/08/11/1994-suzuki-rm125-oem-original-keihin-pwk-36-carburetor-throttle-assembly-91-00/ I have a 1994 Suzuki RM125 PWK Keihin Carburetor Assembly Complete with Throttle Cable and Throttle Tube Assembly for sale. The bowl is held on with allen head bolts. The throttle cable is a little stretched near the carb itself and the throttle tube has a little road rash. This is a used assembly and […]]]>












I have a 1994 Suzuki RM125 PWK Keihin Carburetor Assembly Complete with Throttle Cable and Throttle Tube Assembly for sale. The bowl is held on with allen head bolts. The throttle cable is a little stretched near the carb itself and the throttle tube has a little road rash. This is a used assembly and it should fit many other years. What you see in the images is exactly what you will receive. Thank you for looking and happy shopping!

]]> https://pwkcarburetorcarb.com/2026/08/11/1994-suzuki-rm125-oem-original-keihin-pwk-36-carburetor-throttle-assembly-91-00/feed/ 0 https://pwkcarburetorcarb.com/2026/08/03/2001-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00-2/ https://pwkcarburetorcarb.com/2026/08/03/2001-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00-2/#comments Mon, 03 Aug 2026 05:03:41 +0000 https://pwkcarburetorcarb.com/2026/08/03/2001-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00-2/ 38mm Mikuni TMX Flat Slide Carburetor – Custom Tuned. Upgrade your machine with this high-quality aftermarket 38mm Mikuni TMX flat slide carburetor. Featuring a smooth-bore venturi and flat-slide design, it delivers crisp throttle response, improved fuel atomization, excellent low-end torque, strong mid-range power, and outstanding top-end performance. This provides an excellent starting point for most […]]]>









38mm Mikuni TMX Flat Slide Carburetor – Custom Tuned. Upgrade your machine with this high-quality aftermarket 38mm Mikuni TMX flat slide carburetor. Featuring a smooth-bore venturi and flat-slide design, it delivers crisp throttle response, improved fuel atomization, excellent low-end torque, strong mid-range power, and outstanding top-end performance. This provides an excellent starting point for most applications while still allowing for final jetting adjustments based on engine modifications, altitude, fuel type, and riding conditions. High-quality aftermarket replacement carburetor. 38mm Mikuni TMX flat-slide design. Strong mid-range and top-end performance. Includes spare main and pilot jets for fine tuning. Engine Side (Spigot OD): 46mm. Air Filter Side (OD): 62mm. Overall Length: Approximately 164mm. Overall Width: Approximately 76mm. 2001 models use the non-TPS 38mm Mikuni TMX carburetor. This replacement carburetor does not utilize a TPS. Simply leave the factory TPS connector unplugged during installation. 2001 was the transition year from the 36mm TMX to the 38mm TMX. OEM carburetors are commonly identified as the Mikuni TMX38SS. Later model years may have minor casting or jetting revisions but remain 38mm TMX carburetors. Some applications may require heating and softening the original intake boot and/or airbox boot during installation. Over time, factory rubber boots become hard from age and heat exposure, making installation more difficult. Carefully warming the boots with a heat gun or hot water will usually restore enough flexibility for proper installation. Depending on your application, an aftermarket throttle cable, intake boot, reed spacer, or other minor modifications may also be required. Please compare your original carburetor dimensions before purchasing. Final jetting may still be required depending on your engine modifications, exhaust system, reed valves, airbox configuration, altitude, fuel type, and weather conditions. 1 × 38mm Mikuni TMX Flat Slide Carburetor. This aftermarket 38mm Mikuni TMX flat-slide carburetor is an excellent replacement or performance upgrade for a wide variety of 125cc-300cc two-stroke motorcycles. Please read the entire listing before purchasing. Detailed fitment information, specifications, dimensions, compatible years/models, and installation notes are provided throughout this listing. Please compare your existing carburetor and dimensions before ordering.

]]> https://pwkcarburetorcarb.com/2026/08/03/2001-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00-2/feed/ 0 https://pwkcarburetorcarb.com/2026/07/01/suzuki-rm-60-85-carburetor-oem-keihin-pwk28-rm65-rm85-carb-pwk-28-fast-ship/ https://pwkcarburetorcarb.com/2026/07/01/suzuki-rm-60-85-carburetor-oem-keihin-pwk28-rm65-rm85-carb-pwk-28-fast-ship/#comments Thu, 02 Jul 2026 03:54:41 +0000 https://pwkcarburetorcarb.com/2026/07/01/suzuki-rm-60-85-carburetor-oem-keihin-pwk28-rm65-rm85-carb-pwk-28-fast-ship/ Listing a BRAND NEW GENUINE OEM KEIHIN CARBURETOR for a SUZUKI RM65 and RM85!!! Not a cheap chinese imitation but actual KEIHIN Carb. Straight from the Yamaha Factory and ready to be installed on your ATV. Inner Diameter 28 mm. Outer Diameter to Air Filter 49.5 mm. Outer Diameter to Intake 34.5 mm.]]>









Listing a BRAND NEW GENUINE OEM KEIHIN CARBURETOR for a SUZUKI RM65 and RM85!!! Not a cheap chinese imitation but actual KEIHIN Carb. Straight from the Yamaha Factory and ready to be installed on your ATV. Inner Diameter 28 mm. Outer Diameter to Air Filter 49.5 mm. Outer Diameter to Intake 34.5 mm.

]]> https://pwkcarburetorcarb.com/2026/07/01/suzuki-rm-60-85-carburetor-oem-keihin-pwk28-rm65-rm85-carb-pwk-28-fast-ship/feed/ 0 https://pwkcarburetorcarb.com/2026/06/16/oem-suzuki-rm85-keihin-pwk-carburetor-carb-throttle-assembly-cable-13200-03b30/ https://pwkcarburetorcarb.com/2026/06/16/oem-suzuki-rm85-keihin-pwk-carburetor-carb-throttle-assembly-cable-13200-03b30/#comments Tue, 16 Jun 2026 19:45:48 +0000 https://pwkcarburetorcarb.com/2026/06/16/oem-suzuki-rm85-keihin-pwk-carburetor-carb-throttle-assembly-cable-13200-03b30/ Genuine OEM Suzuki RM85 Keihin Carburetor with Throttle Grip & Cable. This is an authentic, high-quality Made-in-Japan factory part, not a cheap aftermarket reproduction. Brand: Keihin (OEM Suzuki). Country of Manufacture: Japan. Suzuki Part Number: 13200-03B30. Included Components: Carburetor body, internal slide/needle, choke knob, fuel/vent lines, throttle cable, and throttle grip assembly. Please review the […]]]>



















Genuine OEM Suzuki RM85 Keihin Carburetor with Throttle Grip & Cable. This is an authentic, high-quality Made-in-Japan factory part, not a cheap aftermarket reproduction. Brand: Keihin (OEM Suzuki). Country of Manufacture: Japan. Suzuki Part Number: 13200-03B30. Included Components: Carburetor body, internal slide/needle, choke knob, fuel/vent lines, throttle cable, and throttle grip assembly. Please review the high-resolution photos carefully to assess the cosmetic and technical state. Body & Bowl: Clean aluminum casing, stamped with official “KEIHIN” and “KEIHIN JAPAN” logos. No cracks or stripped threads. Throttle Slide: The internal slide moves freely and smoothly within the tower. Lines: Standard vent hoses are attached. Throttle Grip & Cable: Includes a twist grip. Note: There is a small split in the rubber boot on the cable guide (visible in photos), but the inner wire pulls smoothly and functions as intended. Note: As with any used carburetor that has been in storage, it is recommended to clean and inspect the internal jets and float height to ensure it matches your specific setup and elevation before installation. Direct replacement for a 2005 Suzuki RM85. According to Suzuki parts catalogs, this factory part number (13200-03B30) fits RM85 models across a wide range of production years, but please double-check your bike’s compatibility before purchasing. If you have any questions or need additional photos, please feel free to ask!

]]> https://pwkcarburetorcarb.com/2026/06/16/oem-suzuki-rm85-keihin-pwk-carburetor-carb-throttle-assembly-cable-13200-03b30/feed/ 0 https://pwkcarburetorcarb.com/2026/05/25/1996-suzuki-rm125-rm-125-keihin-pwk-carburetor-carb-assy-38-mm-oem-13200-36e10/ https://pwkcarburetorcarb.com/2026/05/25/1996-suzuki-rm125-rm-125-keihin-pwk-carburetor-carb-assy-38-mm-oem-13200-36e10/#comments Mon, 25 May 2026 18:55:42 +0000 https://pwkcarburetorcarb.com/2026/05/25/1996-suzuki-rm125-rm-125-keihin-pwk-carburetor-carb-assy-38-mm-oem-13200-36e10/ Fitment: This is a. 1996 SUZUKI RM125 RM 125 KEIHIN PWK CARBURETOR CARB ASSY 38 MM OEM 13200-36E10. It should be interchangeable with many other years and models. WE ARE ONLY RESPONSIBLE FOR FITMENT ON THE BIKE WHICH THE PART CAME FROM. Please research with the dealer or an online source using the part number […]]]>





Fitment: This is a. 1996 SUZUKI RM125 RM 125 KEIHIN PWK CARBURETOR CARB ASSY 38 MM OEM 13200-36E10. It should be interchangeable with many other years and models. WE ARE ONLY RESPONSIBLE FOR FITMENT ON THE BIKE WHICH THE PART CAME FROM. Please research with the dealer or an online source using the part number to ensure it fits before purchasing. DESCRIPTION: You get exactly what is seen in the pictures… Please don’t forget this part is used, so it will NOT be perfect. I try to describe with plenty of pictures to the best of my ability. Before you leave bad feedback, please give us a chance to make it right! E are a small 100% disabled veteran owned business and we strive to make the customer happy! We do make mistakes…. But we ALWAYS make it right in the end… I ask for the opportunity to work with you if you have any issues. You are ordering and purchasing items from a motorcycle salvage yard, Not a motorcycle dealership. These parts may show wear and minor damage. Used parts may be missing bolts/brackets. These parts have been used, so please don’t expect them to be in brand-new condition. The product you are looking at is exactly what you get! Make sure both have a 100% exact look.

]]> https://pwkcarburetorcarb.com/2026/05/25/1996-suzuki-rm125-rm-125-keihin-pwk-carburetor-carb-assy-38-mm-oem-13200-36e10/feed/ 0 https://pwkcarburetorcarb.com/2026/05/25/2000-suzuki-rm250-oem-keihin-pwk-38-carb-carburetor-body-solenoid-13200-37e30/ https://pwkcarburetorcarb.com/2026/05/25/2000-suzuki-rm250-oem-keihin-pwk-38-carb-carburetor-body-solenoid-13200-37e30/#comments Mon, 25 May 2026 06:54:47 +0000 https://pwkcarburetorcarb.com/2026/05/25/2000-suzuki-rm250-oem-keihin-pwk-38-carb-carburetor-body-solenoid-13200-37e30/ Everything moves freely and smoothly. What you see is what you get. Needs to be cleaned or rebuilt. No cracks, breaks, or repairs.]]>

















Everything moves freely and smoothly. What you see is what you get. Needs to be cleaned or rebuilt. No cracks, breaks, or repairs.

]]> https://pwkcarburetorcarb.com/2026/05/25/2000-suzuki-rm250-oem-keihin-pwk-38-carb-carburetor-body-solenoid-13200-37e30/feed/ 0