https://pwkcarburetorcarb.com Thu, 09 Jul 2026 16:13:45 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://pwkcarburetorcarb.com/2026/07/08/28mm-pwk-carburetor-kawasaki-kx85-2001-2024-pre-jetted-tuned-bolt-on/ https://pwkcarburetorcarb.com/2026/07/08/28mm-pwk-carburetor-kawasaki-kx85-2001-2024-pre-jetted-tuned-bolt-on/#comments Wed, 08 Jul 2026 16:11:41 +0000 https://pwkcarburetorcarb.com/2026/07/08/28mm-pwk-carburetor-kawasaki-kx85-2001-2024-pre-jetted-tuned-bolt-on/ Kawasaki KX85 28mm PWK Carburetor. Professionally Tuned – Bolt-On Ready – Fits 2001-Present. With a professionally prepared 28mm PWK carburetor that is jetted and tuned before it leaves my shop. This is NOT a generic warehouse carburetor. Each unit is personally inspected, adjusted, and configured so it arrives bolt-on ready for a stock or near-stock […]]]>




Kawasaki KX85 28mm PWK Carburetor. Professionally Tuned – Bolt-On Ready – Fits 2001-Present. With a professionally prepared 28mm PWK carburetor that is jetted and tuned before it leaves my shop. This is NOT a generic warehouse carburetor. Each unit is personally inspected, adjusted, and configured so it arrives bolt-on ready for a stock or near-stock KX85. ? Professionally Set Up for KX85. Jetting selected and installed specifically for KX85 applications? Float height checked and properly adjusted? Air screw preset for crisp throttle response? Slide operation inspected? Ready to install and ride. These are set up for. Strong low-end throttle response. Clean, hard top-end pull. While minor fine-tuning may be required depending on elevation, temperature, fuel type, or aftermarket exhaust systems, this carb is configured to run correctly on a standard 2001+ KX85 setup. Compatible with stock throttle cable. Fits factory intake and air boot (2001-Present KX85 models). KX85-II (Big Wheel models). Please confirm intake boot condition prior to installation. ? What’s Included. 1x Professionally Tuned 28mm PWK Carburetor. Installed performance jetting setup. There are many inexpensive carburetors available online. The difference here is setup and experience. I personally configure the jetting so you’re not guessing during installation. That means easier starting, cleaner throttle response, and better rideability right out of the box. If you want a properly prepared carburetor instead of a random preset unit, this is the one.

]]> https://pwkcarburetorcarb.com/2026/07/08/28mm-pwk-carburetor-kawasaki-kx85-2001-2024-pre-jetted-tuned-bolt-on/feed/ 0 https://pwkcarburetorcarb.com/2026/07/03/1994-94-kawasaki-kx125-kx-oem-keihin-pwk-carburetor-carb-fuel-throttle-assembly/ https://pwkcarburetorcarb.com/2026/07/03/1994-94-kawasaki-kx125-kx-oem-keihin-pwk-carburetor-carb-fuel-throttle-assembly/#comments Sat, 04 Jul 2026 03:59:47 +0000 https://pwkcarburetorcarb.com/2026/07/03/1994-94-kawasaki-kx125-kx-oem-keihin-pwk-carburetor-carb-fuel-throttle-assembly/ The carburetor is in good condition; it was removed from a fully functional 1994 KX125 and performed its job excellently. It is recommended to perform maintenance before installing it on a motorcycle. Please review the detailed images, as they provide the best representation of the components’ condition. Everything shown is included. All defects are clearly […]]]>


















The carburetor is in good condition; it was removed from a fully functional 1994 KX125 and performed its job excellently. It is recommended to perform maintenance before installing it on a motorcycle. Please review the detailed images, as they provide the best representation of the components’ condition. Everything shown is included. All defects are clearly shown in the photos. Please check them before purchasing. Body, suspension, plastics may require some cleaning. Normal scuffs and scratches from regular use may be visible on the parts. These are used parts and we try to describe and provide as much info and pictures as possible. If you have any questions please message us, we will be more that happy to assist you! Thank you for your understanding. Our #1 goal is customer service and satisfaction. We work with all of our customers and ensure that they receive the best service and product. If you are having any questions or want to check where the item is, don’t hurry opening a case, please send us a message first. We are here to assist you!! Thank you for your understanding! PLEASE VIEW OUR OTHER ITEMS FOR MORE GREAT DEALS!

]]> https://pwkcarburetorcarb.com/2026/07/03/1994-94-kawasaki-kx125-kx-oem-keihin-pwk-carburetor-carb-fuel-throttle-assembly/feed/ 0 https://pwkcarburetorcarb.com/2026/06/27/1990-kawasaki-kx250-oem-keihin-pwk-38mm-carb-carburetor-body-15001-1561-nice/ https://pwkcarburetorcarb.com/2026/06/27/1990-kawasaki-kx250-oem-keihin-pwk-38mm-carb-carburetor-body-15001-1561-nice/#comments Sun, 28 Jun 2026 03:46:46 +0000 https://pwkcarburetorcarb.com/2026/06/27/1990-kawasaki-kx250-oem-keihin-pwk-38mm-carb-carburetor-body-15001-1561-nice/ This OEM Keihin PWK 38mm carburetor is in great condition with minor wear. Carb has been fully stripped down and cleaned and is in great running shape. Carb will need seals and float bowl screws in order to install and run. No damage or issues. No stripped or seized hardware. Slide in nice shape with […]]]>





















This OEM Keihin PWK 38mm carburetor is in great condition with minor wear. Carb has been fully stripped down and cleaned and is in great running shape. Carb will need seals and float bowl screws in order to install and run. No damage or issues. No stripped or seized hardware. Slide in nice shape with no excessive wear. Main jet: 162, Pilot jet: 50, Slide #7, Needle: N85C. Ready to install seals and run! Removed From: 1990 Kawasaki KX250 Please review all pictures to assess the condition of the item.

]]> https://pwkcarburetorcarb.com/2026/06/27/1990-kawasaki-kx250-oem-keihin-pwk-38mm-carb-carburetor-body-15001-1561-nice/feed/ 0 https://pwkcarburetorcarb.com/2026/06/23/nibbi-racing-carburetor-pwk-38mm-for-450-500cc-motorcycle-honda-yamaha-kawasaki-2/ https://pwkcarburetorcarb.com/2026/06/23/nibbi-racing-carburetor-pwk-38mm-for-450-500cc-motorcycle-honda-yamaha-kawasaki-2/#comments Wed, 24 Jun 2026 03:36:09 +0000 https://pwkcarburetorcarb.com/2026/06/23/nibbi-racing-carburetor-pwk-38mm-for-450-500cc-motorcycle-honda-yamaha-kawasaki-2/ The NIBBI Racing Carburetor PWK 38mm is a high-performance motorcycle accessory suitable for 450-500cc engines. It includes 1 carburetor, 4 jets, 2 stickers, and 1 manual, all made of durable zinc alloy with a black & red color scheme. With a spread bore mounting flange type and universal fitment, this carburetor is ideal for various […]]]>



The NIBBI Racing Carburetor PWK 38mm is a high-performance motorcycle accessory suitable for 450-500cc engines. It includes 1 carburetor, 4 jets, 2 stickers, and 1 manual, all made of durable zinc alloy with a black & red color scheme. With a spread bore mounting flange type and universal fitment, this carburetor is ideal for various machine types including dual sport motorcycles, scooters, street motorcycles, and off-road motorcycles. The NIBBI Racing Carburetor PWK 38mm is a reliable choice for enhancing the performance of your motorcycle.

]]> https://pwkcarburetorcarb.com/2026/06/23/nibbi-racing-carburetor-pwk-38mm-for-450-500cc-motorcycle-honda-yamaha-kawasaki-2/feed/ 0 https://pwkcarburetorcarb.com/2026/06/21/keihin-carburetor-28mm-fits-kawasaki-kx100-2009-intake-bowl-pwk-kx85-15003-1643/ https://pwkcarburetorcarb.com/2026/06/21/keihin-carburetor-28mm-fits-kawasaki-kx100-2009-intake-bowl-pwk-kx85-15003-1643/#comments Sun, 21 Jun 2026 07:56:42 +0000 https://pwkcarburetorcarb.com/2026/06/21/keihin-carburetor-28mm-fits-kawasaki-kx100-2009-intake-bowl-pwk-kx85-15003-1643/ This Carburetor was carefully removed from a 2009 Kawasaki KX100. It may show normal signs of wear consistent with prior use. The exact condition is shown clearly in the photos, so please review them closely. This part will fit various years and models; please verify fitment for your specific machine before purchasing. All photos are […]]]>





This Carburetor was carefully removed from a 2009 Kawasaki KX100. It may show normal signs of wear consistent with prior use. The exact condition is shown clearly in the photos, so please review them closely. This part will fit various years and models; please verify fitment for your specific machine before purchasing. All photos are of the actual item you will receive, professionally prepared to accurately represent the condition. If you need any other parts from this bike, check out our profile – we offer a wide selection of new and used motorcycle parts from 50cc to 650cc, covering major brands including KTM, Husqvarna, GasGas, Yamaha, Honda, Kawasaki, Suzuki, Cobra, and more. If you have any questions or would like additional photos or details, feel free to message us – we’re happy to help.

]]> https://pwkcarburetorcarb.com/2026/06/21/keihin-carburetor-28mm-fits-kawasaki-kx100-2009-intake-bowl-pwk-kx85-15003-1643/feed/ 0 https://pwkcarburetorcarb.com/2026/06/17/2014-kawasaki-kx85-kx-85-kx112-100-112-carburetor-carb-keihin-pwk-oem-7/ https://pwkcarburetorcarb.com/2026/06/17/2014-kawasaki-kx85-kx-85-kx112-100-112-carburetor-carb-keihin-pwk-oem-7/#comments Wed, 17 Jun 2026 19:48:21 +0000 https://pwkcarburetorcarb.com/2026/06/17/2014-kawasaki-kx85-kx-85-kx112-100-112-carburetor-carb-keihin-pwk-oem-7/ The carburetor came from a clean 2014 KX85. Item is in great condition with no signs of wear or damage. Item worked great while still on the bike. Item may fit other models. Check online parts finders or contact dealers for fitment.]]>











The carburetor came from a clean 2014 KX85. Item is in great condition with no signs of wear or damage. Item worked great while still on the bike. Item may fit other models. Check online parts finders or contact dealers for fitment.

]]> https://pwkcarburetorcarb.com/2026/06/17/2014-kawasaki-kx85-kx-85-kx112-100-112-carburetor-carb-keihin-pwk-oem-7/feed/ 0 https://pwkcarburetorcarb.com/2026/06/13/keihin-38mm-pwk-airstriker-carburetor-kawasaki-kx250-dirtbike-with-jet-kit/ https://pwkcarburetorcarb.com/2026/06/13/keihin-38mm-pwk-airstriker-carburetor-kawasaki-kx250-dirtbike-with-jet-kit/#comments Sat, 13 Jun 2026 19:37:42 +0000 https://pwkcarburetorcarb.com/2026/06/13/keihin-38mm-pwk-airstriker-carburetor-kawasaki-kx250-dirtbike-with-jet-kit/ The Air Striker design features directional intake fins that enhance airflow to the venturi, delivering stronger low-to-mid range response and reducing bogging under hard acceleration. The flat-slide design provides crisp throttle control and excellent top-end performance. This carburetor is a popular upgrade and replacement for many motocross and ATV models, including. Honda: CR125, CR250 especially […]]]>









The Air Striker design features directional intake fins that enhance airflow to the venturi, delivering stronger low-to-mid range response and reducing bogging under hard acceleration. The flat-slide design provides crisp throttle control and excellent top-end performance. This carburetor is a popular upgrade and replacement for many motocross and ATV models, including. Honda: CR125, CR250 especially 1999? 2000, CR500, TRX250R, ATC250R. Yamaha: YZ125, YZ250, YFZ350 Banshee (commonly used in pairs). KTM: 125 SX/EXC, 150 SX, 250 SX/EXC, 300 XC/EXC, 380/500 models (great upgrade from 2017+ Mikuni TMX). Kawasaki: KX125, KX250, KX500. Suzuki: RM125, RM250, RMX250, LT250R, Quadzilla LT500R. Key Dimensions for 38mm PWK Air Striker: Total Height: 165 mm (approx) Intake Diameter: 38 mm (Inner) / 46 mm (Outer) Air Filter Side: 62 mm (Inner) / 70 mm (Outer) Float Height: 16 mm. Carburetor comes ready for installation with baseline jetting and is easily tunable for your specific setup. Installed is a #170 main, and #55 pilot, I include a 172/175/178 along with 45/45/50 pilots for fine tuning.

]]> https://pwkcarburetorcarb.com/2026/06/13/keihin-38mm-pwk-airstriker-carburetor-kawasaki-kx250-dirtbike-with-jet-kit/feed/ 0 https://pwkcarburetorcarb.com/2026/06/05/1988-kawasaki-kx250-kx-250-carburetor-carb-main-body-15001-1398-oem-keihin-pwk/ https://pwkcarburetorcarb.com/2026/06/05/1988-kawasaki-kx250-kx-250-carburetor-carb-main-body-15001-1398-oem-keihin-pwk/#comments Fri, 05 Jun 2026 07:16:48 +0000 https://pwkcarburetorcarb.com/2026/06/05/1988-kawasaki-kx250-kx-250-carburetor-carb-main-body-15001-1398-oem-keihin-pwk/ Oem keihin main body only. The passages are clean and clear. It comes with an oem Keihin 172 main jet, it does not include the pilot jet. It comes with everything shown. It came off a good running 88 kx250, but fits many other Kawasaki bikes. Please see pictures for more detailed description.]]>

























Oem keihin main body only. The passages are clean and clear. It comes with an oem Keihin 172 main jet, it does not include the pilot jet. It comes with everything shown. It came off a good running 88 kx250, but fits many other Kawasaki bikes. Please see pictures for more detailed description.

]]> https://pwkcarburetorcarb.com/2026/06/05/1988-kawasaki-kx250-kx-250-carburetor-carb-main-body-15001-1398-oem-keihin-pwk/feed/ 0 https://pwkcarburetorcarb.com/2026/06/04/keihin-38mm-pwk-airstriker-carburetor-for-kawasaki-kdx-200-220-with-jet-kit/ https://pwkcarburetorcarb.com/2026/06/04/keihin-38mm-pwk-airstriker-carburetor-for-kawasaki-kdx-200-220-with-jet-kit/#comments Thu, 04 Jun 2026 07:14:43 +0000 https://pwkcarburetorcarb.com/2026/06/04/keihin-38mm-pwk-airstriker-carburetor-for-kawasaki-kdx-200-220-with-jet-kit/ The Air Striker design features directional intake fins that enhance airflow to the venturi, delivering stronger low-to-mid range response and reducing bogging under hard acceleration. The flat-slide design provides crisp throttle control and excellent top-end performance. This carburetor is a popular upgrade and replacement for many motocross and ATV models, including. Honda: CR125, CR250 especially […]]]>









The Air Striker design features directional intake fins that enhance airflow to the venturi, delivering stronger low-to-mid range response and reducing bogging under hard acceleration. The flat-slide design provides crisp throttle control and excellent top-end performance. This carburetor is a popular upgrade and replacement for many motocross and ATV models, including. Honda: CR125, CR250 especially 1999? 2000, CR500, TRX250R, ATC250R. Yamaha: YZ125, YZ250, YFZ350 Banshee (commonly used in pairs). KTM: 125 SX/EXC, 150 SX, 250 SX/EXC, 300 XC/EXC, 380/500 models (great upgrade from 2017+ Mikuni TMX). Kawasaki: KX125, KX250, KX500. Suzuki: RM125, RM250, RMX250, LT250R, Quadzilla LT500R. Key Dimensions for 38mm PWK Air Striker: Total Height: 165 mm (approx) Intake Diameter: 38 mm (Inner) / 46 mm (Outer) Air Filter Side: 62 mm (Inner) / 70 mm (Outer) Float Height: 16 mm. Carburetor comes ready for installation with baseline jetting and is easily tunable for your specific setup. Installed is a #170 main, and #55 pilot, I include a 172/175/178 along with 45/45/50 pilots for fine tuning.

]]> https://pwkcarburetorcarb.com/2026/06/04/keihin-38mm-pwk-airstriker-carburetor-for-kawasaki-kdx-200-220-with-jet-kit/feed/ 0 https://pwkcarburetorcarb.com/2026/05/31/14-25-kawasaki-kx85-oem-keihin-pwk-carburetor-and-oem-throttle-cable/ https://pwkcarburetorcarb.com/2026/05/31/14-25-kawasaki-kx85-oem-keihin-pwk-carburetor-and-oem-throttle-cable/#comments Sun, 31 May 2026 07:06:55 +0000 https://pwkcarburetorcarb.com/2026/05/31/14-25-kawasaki-kx85-oem-keihin-pwk-carburetor-and-oem-throttle-cable/ Description: Genuine Kawasaki factory Keihin PWK 28 flat-slide carburetor package. Includes stock choke knob, vent lines, and factory throttle cable. Taken off a 2025 kx85 with less than 10 hours of light use.]]>













Description: Genuine Kawasaki factory Keihin PWK 28 flat-slide carburetor package. Includes stock choke knob, vent lines, and factory throttle cable. Taken off a 2025 kx85 with less than 10 hours of light use.

]]> https://pwkcarburetorcarb.com/2026/05/31/14-25-kawasaki-kx85-oem-keihin-pwk-carburetor-and-oem-throttle-cable/feed/ 0