https://pwkcarburetorcarb.com Tue, 09 Jun 2026 07:24:45 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://pwkcarburetorcarb.com/2026/06/09/2002-2008-ktm125-ktm125sx-ktm-125-keihin-pwk-40mm-carb-carburetor-throttle/ https://pwkcarburetorcarb.com/2026/06/09/2002-2008-ktm125-ktm125sx-ktm-125-keihin-pwk-40mm-carb-carburetor-throttle/#comments Tue, 09 Jun 2026 07:24:45 +0000 https://pwkcarburetorcarb.com/2026/06/09/2002-2008-ktm125-ktm125sx-ktm-125-keihin-pwk-40mm-carb-carburetor-throttle/ ITEM CAME OFF OF A 2005 Ktm 125sx. CAME OF A GOOD WORKING CONDITION BIKE TESTED. NO SIGNS OF ANY CRACKS, WELDS. COMES WITH ALL THAT IS IN THE PICTURES. PLEASE VIEW PICTURES FOR CLOSER DETAILS. This can be done by comparing part numbers with your original part or by contacting a dealer. We try […]]]>













ITEM CAME OFF OF A 2005 Ktm 125sx. CAME OF A GOOD WORKING CONDITION BIKE TESTED. NO SIGNS OF ANY CRACKS, WELDS. COMES WITH ALL THAT IS IN THE PICTURES. PLEASE VIEW PICTURES FOR CLOSER DETAILS. This can be done by comparing part numbers with your original part or by contacting a dealer. We try our best to provide the most information available. For any additional questions feel free to contact me.

]]> https://pwkcarburetorcarb.com/2026/06/09/2002-2008-ktm125-ktm125sx-ktm-125-keihin-pwk-40mm-carb-carburetor-throttle/feed/ 0 https://pwkcarburetorcarb.com/2026/06/08/keihin-pwk-28mm-carb-for-yamaha-banshee-350-1987-2006-tuned-jets/ https://pwkcarburetorcarb.com/2026/06/08/keihin-pwk-28mm-carb-for-yamaha-banshee-350-1987-2006-tuned-jets/#comments Mon, 08 Jun 2026 19:23:40 +0000 https://pwkcarburetorcarb.com/2026/06/08/keihin-pwk-28mm-carb-for-yamaha-banshee-350-1987-2006-tuned-jets/ Tuned 28mm PWK Power Jet Carburetor Set. Yamaha Banshee – Complete Kit w/ Cable & Jet Kit. This listing is for a pair of 28mm PWK Power Jet carburetors professionally pre-tuned by me for Yamaha Banshee applications. These are not random out-of-the-box carbs – each set is configured with a proven baseline setup to give […]]]>




Tuned 28mm PWK Power Jet Carburetor Set. Yamaha Banshee – Complete Kit w/ Cable & Jet Kit. This listing is for a pair of 28mm PWK Power Jet carburetors professionally pre-tuned by me for Yamaha Banshee applications. These are not random out-of-the-box carbs – each set is configured with a proven baseline setup to give you a strong starting point for performance and throttle response. Custom Tuning Included. Unlike many generic setups on the market, these carburetors are professionally tuned with the correct jetting specs for Yamaha Banshee performance applications – not small displacement 65cc-style jetting that can cause poor running conditions. ? Installed Baseline Setup. 158 Main Jets. 48 Pilot Jets. Custom tapered needles set in the 3rd clip position. Power Jet configuration installed. Complete Kit Includes. (2) 28mm PWK Power Jet Carburetors. Jet Kit for Fine Tuning. Everything you need to install and dial in your setup. Saves you time guessing on jetting. Excellent for trail or performance builds. Includes extra jets for dialing in your specific setup. Yamaha Banshee – All Years.

]]> https://pwkcarburetorcarb.com/2026/06/08/keihin-pwk-28mm-carb-for-yamaha-banshee-350-1987-2006-tuned-jets/feed/ 0 https://pwkcarburetorcarb.com/2026/06/08/genuine-keihin-astemo-fuel-carburetor-carb-33mm-pwk33-2-stroke-80-175cc-3/ https://pwkcarburetorcarb.com/2026/06/08/genuine-keihin-astemo-fuel-carburetor-carb-33mm-pwk33-2-stroke-80-175cc-3/#comments Mon, 08 Jun 2026 07:22:41 +0000 https://pwkcarburetorcarb.com/2026/06/08/genuine-keihin-astemo-fuel-carburetor-carb-33mm-pwk33-2-stroke-80-175cc-3/ Cycles R Us specializes in NEW, USED and Aftermarket Motorcycle, Dirt Bike and ATV parts and accessories. We have been supplying quality used parts since 1996. CRU Products was started by Cycles R Us in 2009. Cycles R Us has been in the salvage business for over 25 years. Being in the salvage business, we […]]]>


Cycles R Us specializes in NEW, USED and Aftermarket Motorcycle, Dirt Bike and ATV parts and accessories. We have been supplying quality used parts since 1996. CRU Products was started by Cycles R Us in 2009. Cycles R Us has been in the salvage business for over 25 years. Being in the salvage business, we not only see what parts are in a very high demand but what parts are in a very high demand that are costly at the dealership. Distributors and Dealers are welcome. Cycles R Us describes all parts as accurately as possible, but we are human and mistakes do happen. PWK 33mm Single Universal 2 Stroke, 80-175cc This is for the carb only We are an authorized Keihin Dealer. These are Genuine Keihin carburetors, not Chinese knock offs. Photo may not be an exact representation of the product. Cycles R Us reserves the right to terminate any sales offered at our discretion. All items must be paid for within 4 days. Items not paid for in 4 days will be relisted.

]]> https://pwkcarburetorcarb.com/2026/06/08/genuine-keihin-astemo-fuel-carburetor-carb-33mm-pwk33-2-stroke-80-175cc-3/feed/ 0 https://pwkcarburetorcarb.com/2026/06/07/genuine-keihin-astemo-fuel-carburetor-carb-39mm-pwk-39-single-2-stroke-250-500cc/ https://pwkcarburetorcarb.com/2026/06/07/genuine-keihin-astemo-fuel-carburetor-carb-39mm-pwk-39-single-2-stroke-250-500cc/#comments Sun, 07 Jun 2026 19:21:41 +0000 https://pwkcarburetorcarb.com/2026/06/07/genuine-keihin-astemo-fuel-carburetor-carb-39mm-pwk-39-single-2-stroke-250-500cc/ Cycles R Us specializes in NEW, USED and Aftermarket Motorcycle, Dirt Bike and ATV parts and accessories. We have been supplying quality used parts since 1996. CRU Products was started by Cycles R Us in 2009. Cycles R Us has been in the salvage business for over 25 years. Being in the salvage business, we […]]]>


Cycles R Us specializes in NEW, USED and Aftermarket Motorcycle, Dirt Bike and ATV parts and accessories. We have been supplying quality used parts since 1996. CRU Products was started by Cycles R Us in 2009. Cycles R Us has been in the salvage business for over 25 years. Being in the salvage business, we not only see what parts are in a very high demand but what parts are in a very high demand that are costly at the dealership. Distributors and Dealers are welcome. Cycles R Us describes all parts as accurately as possible, but we are human and mistakes do happen. PWK 39mm Single Universal 2 Stroke, 250-500cc This is for the carb only We are an authorized Keihin Dealer. These are Genuine Keihin carburetors, not Chinese knock offs. Photo may not be an exact representation of the product. Cycles R Us reserves the right to terminate any sales offered at our discretion. All items must be paid for within 4 days. Items not paid for in 4 days will be relisted.

]]> https://pwkcarburetorcarb.com/2026/06/07/genuine-keihin-astemo-fuel-carburetor-carb-39mm-pwk-39-single-2-stroke-250-500cc/feed/ 0 https://pwkcarburetorcarb.com/2026/06/07/1999-1996-2000-suzuki-rm125x-oem-keihin-pwk-carburetor-13200-36e30-clean/ https://pwkcarburetorcarb.com/2026/06/07/1999-1996-2000-suzuki-rm125x-oem-keihin-pwk-carburetor-13200-36e30-clean/#comments Sun, 07 Jun 2026 07:20:43 +0000 https://pwkcarburetorcarb.com/2026/06/07/1999-1996-2000-suzuki-rm125x-oem-keihin-pwk-carburetor-13200-36e30-clean/ This is a Keihin PWK carb from a 1999 Suzuki RM125X. It is in good overall condition. It is clean inside and ready to use. Suzuki part number is 13200-36E30. It MAY fit the following models. IF THE ITEM WAS DESCRIBED INCORRECTLY THEN I WILL R EFUND. I WILL ALWAYS TAKE CARE OF ANY ISSUE […]]]>









This is a Keihin PWK carb from a 1999 Suzuki RM125X. It is in good overall condition. It is clean inside and ready to use. Suzuki part number is 13200-36E30. It MAY fit the following models. IF THE ITEM WAS DESCRIBED INCORRECTLY THEN I WILL R EFUND. I WILL ALWAYS TAKE CARE OF ANY ISSUE THAT MAY COME UP. The internation al rate is a estimate only, the actual cost may be higher or lower, please ask for a quote. THE RATES LISTED MAY BE HIGHER OR LOWER THAN THE ACTUAL COST. I HAVE NO WAY OF KNOW HOW MUCH YOUR COUNTRY WILL CHARGE.

]]> https://pwkcarburetorcarb.com/2026/06/07/1999-1996-2000-suzuki-rm125x-oem-keihin-pwk-carburetor-13200-36e30-clean/feed/ 0 https://pwkcarburetorcarb.com/2026/06/06/keihin-38mm-pwk-airstriker-carburetor-for-suzuki-rm125-dirtbike-with-jet-kit/ https://pwkcarburetorcarb.com/2026/06/06/keihin-38mm-pwk-airstriker-carburetor-for-suzuki-rm125-dirtbike-with-jet-kit/#comments Sat, 06 Jun 2026 19:19:53 +0000 https://pwkcarburetorcarb.com/2026/06/06/keihin-38mm-pwk-airstriker-carburetor-for-suzuki-rm125-dirtbike-with-jet-kit/ The Air Striker design features directional intake fins that enhance airflow to the venturi, delivering stronger low-to-mid range response and reducing bogging under hard acceleration. The flat-slide design provides crisp throttle control and excellent top-end performance. This carburetor is a popular upgrade and replacement for many motocross and ATV models, including. Honda: CR125, CR250 especially […]]]>









The Air Striker design features directional intake fins that enhance airflow to the venturi, delivering stronger low-to-mid range response and reducing bogging under hard acceleration. The flat-slide design provides crisp throttle control and excellent top-end performance. This carburetor is a popular upgrade and replacement for many motocross and ATV models, including. Honda: CR125, CR250 especially 1999? 2000, CR500, TRX250R, ATC250R. Yamaha: YZ125, YZ250, YFZ350 Banshee (commonly used in pairs). KTM: 125 SX/EXC, 150 SX, 250 SX/EXC, 300 XC/EXC, 380/500 models (great upgrade from 2017+ Mikuni TMX). Kawasaki: KX125, KX250, KX500. Suzuki: RM125, RM250, RMX250, LT250R, Quadzilla LT500R. Key Dimensions for 38mm PWK Air Striker: Total Height: 165 mm (approx) Intake Diameter: 38 mm (Inner) / 46 mm (Outer) Air Filter Side: 62 mm (Inner) / 70 mm (Outer) Float Height: 16 mm. Carburetor comes ready for installation with baseline jetting and is easily tunable for your specific setup. Installed is a #170 main, and #55 pilot, I include a 172/175/178 along with 45/45/50 pilots for fine tuning.

]]> https://pwkcarburetorcarb.com/2026/06/06/keihin-38mm-pwk-airstriker-carburetor-for-suzuki-rm125-dirtbike-with-jet-kit/feed/ 0 https://pwkcarburetorcarb.com/2026/06/05/pwk-40-keihin-carburetor-honda-250r-trx250r-cr250-atc250r-oem-carb-fast-ship/ https://pwkcarburetorcarb.com/2026/06/05/pwk-40-keihin-carburetor-honda-250r-trx250r-cr250-atc250r-oem-carb-fast-ship/#comments Fri, 05 Jun 2026 19:17:47 +0000 https://pwkcarburetorcarb.com/2026/06/05/pwk-40-keihin-carburetor-honda-250r-trx250r-cr250-atc250r-oem-carb-fast-ship/ Listing a BRAND NEW GENUINE OEM KEIHIN CARBURETOR for a Honda TRX250R, CR250R and ATC250R!!! Comes with stock jetting: Pilot jet 55 and main jet 160. Not a cheap chinese imitation but actual KEIHIN Carb. Straight from the Honda Factory and ready to be installed on your ATV. ID Cylinder – Side. Keihin Carburetor For […]]]>













Listing a BRAND NEW GENUINE OEM KEIHIN CARBURETOR for a Honda TRX250R, CR250R and ATC250R!!! Comes with stock jetting: Pilot jet 55 and main jet 160. Not a cheap chinese imitation but actual KEIHIN Carb. Straight from the Honda Factory and ready to be installed on your ATV. ID Cylinder – Side. Keihin Carburetor For Honda CR500 CR 500 CR500R Suzuki Kawasaki ATV PWK 40MM PA.

]]> https://pwkcarburetorcarb.com/2026/06/05/pwk-40-keihin-carburetor-honda-250r-trx250r-cr250-atc250r-oem-carb-fast-ship/feed/ 0 https://pwkcarburetorcarb.com/2026/06/05/1988-kawasaki-kx250-kx-250-carburetor-carb-main-body-15001-1398-oem-keihin-pwk/ https://pwkcarburetorcarb.com/2026/06/05/1988-kawasaki-kx250-kx-250-carburetor-carb-main-body-15001-1398-oem-keihin-pwk/#comments Fri, 05 Jun 2026 07:16:48 +0000 https://pwkcarburetorcarb.com/2026/06/05/1988-kawasaki-kx250-kx-250-carburetor-carb-main-body-15001-1398-oem-keihin-pwk/ Oem keihin main body only. The passages are clean and clear. It comes with an oem Keihin 172 main jet, it does not include the pilot jet. It comes with everything shown. It came off a good running 88 kx250, but fits many other Kawasaki bikes. Please see pictures for more detailed description.]]>

























Oem keihin main body only. The passages are clean and clear. It comes with an oem Keihin 172 main jet, it does not include the pilot jet. It comes with everything shown. It came off a good running 88 kx250, but fits many other Kawasaki bikes. Please see pictures for more detailed description.

]]> https://pwkcarburetorcarb.com/2026/06/05/1988-kawasaki-kx250-kx-250-carburetor-carb-main-body-15001-1398-oem-keihin-pwk/feed/ 0 https://pwkcarburetorcarb.com/2026/06/04/keihin-pwk-38mm-air-striker-carburetor-for-yz250-rm250-cr250-kx250-cr500-kx500-17/ https://pwkcarburetorcarb.com/2026/06/04/keihin-pwk-38mm-air-striker-carburetor-for-yz250-rm250-cr250-kx250-cr500-kx500-17/#comments Thu, 04 Jun 2026 19:15:42 +0000 https://pwkcarburetorcarb.com/2026/06/04/keihin-pwk-38mm-air-striker-carburetor-for-yz250-rm250-cr250-kx250-cr500-kx500-17/ Keihin PWK 38mm Air Striker Carburetor For YZ250 RM250 CR250 KX250 CR500 KX500.]]>




Keihin PWK 38mm Air Striker Carburetor For YZ250 RM250 CR250 KX250 CR500 KX500.

]]> https://pwkcarburetorcarb.com/2026/06/04/keihin-pwk-38mm-air-striker-carburetor-for-yz250-rm250-cr250-kx250-cr500-kx500-17/feed/ 0 https://pwkcarburetorcarb.com/2026/06/04/keihin-38mm-pwk-airstriker-carburetor-for-kawasaki-kdx-200-220-with-jet-kit/ https://pwkcarburetorcarb.com/2026/06/04/keihin-38mm-pwk-airstriker-carburetor-for-kawasaki-kdx-200-220-with-jet-kit/#comments Thu, 04 Jun 2026 07:14:43 +0000 https://pwkcarburetorcarb.com/2026/06/04/keihin-38mm-pwk-airstriker-carburetor-for-kawasaki-kdx-200-220-with-jet-kit/ The Air Striker design features directional intake fins that enhance airflow to the venturi, delivering stronger low-to-mid range response and reducing bogging under hard acceleration. The flat-slide design provides crisp throttle control and excellent top-end performance. This carburetor is a popular upgrade and replacement for many motocross and ATV models, including. Honda: CR125, CR250 especially […]]]>









The Air Striker design features directional intake fins that enhance airflow to the venturi, delivering stronger low-to-mid range response and reducing bogging under hard acceleration. The flat-slide design provides crisp throttle control and excellent top-end performance. This carburetor is a popular upgrade and replacement for many motocross and ATV models, including. Honda: CR125, CR250 especially 1999? 2000, CR500, TRX250R, ATC250R. Yamaha: YZ125, YZ250, YFZ350 Banshee (commonly used in pairs). KTM: 125 SX/EXC, 150 SX, 250 SX/EXC, 300 XC/EXC, 380/500 models (great upgrade from 2017+ Mikuni TMX). Kawasaki: KX125, KX250, KX500. Suzuki: RM125, RM250, RMX250, LT250R, Quadzilla LT500R. Key Dimensions for 38mm PWK Air Striker: Total Height: 165 mm (approx) Intake Diameter: 38 mm (Inner) / 46 mm (Outer) Air Filter Side: 62 mm (Inner) / 70 mm (Outer) Float Height: 16 mm. Carburetor comes ready for installation with baseline jetting and is easily tunable for your specific setup. Installed is a #170 main, and #55 pilot, I include a 172/175/178 along with 45/45/50 pilots for fine tuning.

]]> https://pwkcarburetorcarb.com/2026/06/04/keihin-38mm-pwk-airstriker-carburetor-for-kawasaki-kdx-200-220-with-jet-kit/feed/ 0