https://pwkcarburetorcarb.com Fri, 14 Aug 2026 17:26:41 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://pwkcarburetorcarb.com/2026/08/03/2001-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00-2/ https://pwkcarburetorcarb.com/2026/08/03/2001-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00-2/#comments Mon, 03 Aug 2026 05:03:41 +0000 https://pwkcarburetorcarb.com/2026/08/03/2001-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00-2/ 38mm Mikuni TMX Flat Slide Carburetor – Custom Tuned. Upgrade your machine with this high-quality aftermarket 38mm Mikuni TMX flat slide carburetor. Featuring a smooth-bore venturi and flat-slide design, it delivers crisp throttle response, improved fuel atomization, excellent low-end torque, strong mid-range power, and outstanding top-end performance. This provides an excellent starting point for most […]]]>









38mm Mikuni TMX Flat Slide Carburetor – Custom Tuned. Upgrade your machine with this high-quality aftermarket 38mm Mikuni TMX flat slide carburetor. Featuring a smooth-bore venturi and flat-slide design, it delivers crisp throttle response, improved fuel atomization, excellent low-end torque, strong mid-range power, and outstanding top-end performance. This provides an excellent starting point for most applications while still allowing for final jetting adjustments based on engine modifications, altitude, fuel type, and riding conditions. High-quality aftermarket replacement carburetor. 38mm Mikuni TMX flat-slide design. Strong mid-range and top-end performance. Includes spare main and pilot jets for fine tuning. Engine Side (Spigot OD): 46mm. Air Filter Side (OD): 62mm. Overall Length: Approximately 164mm. Overall Width: Approximately 76mm. 2001 models use the non-TPS 38mm Mikuni TMX carburetor. This replacement carburetor does not utilize a TPS. Simply leave the factory TPS connector unplugged during installation. 2001 was the transition year from the 36mm TMX to the 38mm TMX. OEM carburetors are commonly identified as the Mikuni TMX38SS. Later model years may have minor casting or jetting revisions but remain 38mm TMX carburetors. Some applications may require heating and softening the original intake boot and/or airbox boot during installation. Over time, factory rubber boots become hard from age and heat exposure, making installation more difficult. Carefully warming the boots with a heat gun or hot water will usually restore enough flexibility for proper installation. Depending on your application, an aftermarket throttle cable, intake boot, reed spacer, or other minor modifications may also be required. Please compare your original carburetor dimensions before purchasing. Final jetting may still be required depending on your engine modifications, exhaust system, reed valves, airbox configuration, altitude, fuel type, and weather conditions. 1 × 38mm Mikuni TMX Flat Slide Carburetor. This aftermarket 38mm Mikuni TMX flat-slide carburetor is an excellent replacement or performance upgrade for a wide variety of 125cc-300cc two-stroke motorcycles. Please read the entire listing before purchasing. Detailed fitment information, specifications, dimensions, compatible years/models, and installation notes are provided throughout this listing. Please compare your existing carburetor and dimensions before ordering.

]]> https://pwkcarburetorcarb.com/2026/08/03/2001-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00-2/feed/ 0 https://pwkcarburetorcarb.com/2026/07/06/2001-2006-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00-2/ https://pwkcarburetorcarb.com/2026/07/06/2001-2006-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00-2/#comments Tue, 07 Jul 2026 04:08:43 +0000 https://pwkcarburetorcarb.com/2026/07/06/2001-2006-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00-2/ This carburetor is set up with a proven baseline jetting configuration for performance and reliability on stock and lightly modified RM125 engines. This provides a strong starting point for most RM125 builds. Final tuning may be required depending on. TMX flatslide design for instant throttle response. Fully tunable jetting system. The flatslide design provides quicker […]]]>









This carburetor is set up with a proven baseline jetting configuration for performance and reliability on stock and lightly modified RM125 engines. This provides a strong starting point for most RM125 builds. Final tuning may be required depending on. TMX flatslide design for instant throttle response. Fully tunable jetting system. The flatslide design provides quicker slide response and a more direct throttle feel compared to worn stock carburetors. Clearance within your chassis. Depending on model year and condition of the boots, the intake boot and/or airbox boot may need to be softened or heated to ensure proper fitment and sealing. Type: Mikuni TMX Flatslide. Mikuni TMX 38mm Carburetor. 410 Main Jet (installed). 40 Pilot Jet (installed). Professional installation and proper jet tuning are recommended for optimal performance and engine safety. We specialize in performance carburetors and 2-stroke components.

]]> https://pwkcarburetorcarb.com/2026/07/06/2001-2006-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00-2/feed/ 0 https://pwkcarburetorcarb.com/2026/06/18/yamaha-yz85-28mm-keihin-pwk-replacement-carburetor-with-vforce-4r-reed-valve-kit/ https://pwkcarburetorcarb.com/2026/06/18/yamaha-yz85-28mm-keihin-pwk-replacement-carburetor-with-vforce-4r-reed-valve-kit/#comments Thu, 18 Jun 2026 19:51:04 +0000 https://pwkcarburetorcarb.com/2026/06/18/yamaha-yz85-28mm-keihin-pwk-replacement-carburetor-with-vforce-4r-reed-valve-kit/ Yamaha YZ85 28mm PWK Power Jet Carburetor + V-Force 3 Reed Valve Kit?? Upgrade your Yamaha YZ85 with this high-performance 28mm PWK Power Jet carburetor and V-Force 4R reed valve kit. This setup is professionally tuned and configured to deliver improved throttle response, stronger midrange power, and better overall performance compared to the restrictive stock […]]]>







Yamaha YZ85 28mm PWK Power Jet Carburetor + V-Force 3 Reed Valve Kit?? Upgrade your Yamaha YZ85 with this high-performance 28mm PWK Power Jet carburetor and V-Force 4R reed valve kit. This setup is professionally tuned and configured to deliver improved throttle response, stronger midrange power, and better overall performance compared to the restrictive stock setup. Professionally Tuned Setup This carburetor is personally pre-jetted and tuned by me for the Yamaha YZ85 application to provide an excellent starting point right out of the box. Installed Jetting Includes. 135 Main Jet. 42 Pilot Jet. JJH Needle Installed. Additional spare jets are included for fine tuning based on your elevation, fuel mixture, exhaust setup, or riding conditions. ? Kit Includes. 28mm PWK Power Jet Carburetor. V-Force 4R Reed Valve Assembly. Intake manifold. Throttle cable. Extra tuning jets. Performance Benefits. Faster throttle response. Improved low-to-mid range power. Increased airflow over stock carburetor. Better fuel atomization. Excellent upgrade for stock or modified engines. ? Fitment Yamaha YZ85 Models. Please verify compatibility with your exact year and setup before purchasing. If you have aftermarket modifications or need different jetting specs for your setup, feel free to message me before purchasing.

]]> https://pwkcarburetorcarb.com/2026/06/18/yamaha-yz85-28mm-keihin-pwk-replacement-carburetor-with-vforce-4r-reed-valve-kit/feed/ 0 https://pwkcarburetorcarb.com/2026/05/04/2003-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00/ https://pwkcarburetorcarb.com/2026/05/04/2003-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00/#comments Mon, 04 May 2026 06:01:57 +0000 https://pwkcarburetorcarb.com/2026/05/04/2003-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00/ This carburetor is set up with a proven baseline jetting configuration for performance and reliability on stock and lightly modified RM125 engines. This provides a strong starting point for most RM125 builds. Final tuning may be required depending on. TMX flatslide design for instant throttle response. Fully tunable jetting system. The flatslide design provides quicker […]]]>









This carburetor is set up with a proven baseline jetting configuration for performance and reliability on stock and lightly modified RM125 engines. This provides a strong starting point for most RM125 builds. Final tuning may be required depending on. TMX flatslide design for instant throttle response. Fully tunable jetting system. The flatslide design provides quicker slide response and a more direct throttle feel compared to worn stock carburetors. Clearance within your chassis. Depending on model year and condition of the boots, the intake boot and/or airbox boot may need to be softened or heated to ensure proper fitment and sealing. Type: Mikuni TMX Flatslide. Mikuni TMX 38mm Carburetor. 410 Main Jet (installed). 40 Pilot Jet (installed). Professional installation and proper jet tuning are recommended for optimal performance and engine safety. We specialize in performance carburetors and 2-stroke components.

]]> https://pwkcarburetorcarb.com/2026/05/04/2003-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00/feed/ 0 https://pwkcarburetorcarb.com/2026/04/23/2001-2006-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00/ https://pwkcarburetorcarb.com/2026/04/23/2001-2006-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00/#comments Thu, 23 Apr 2026 17:34:41 +0000 https://pwkcarburetorcarb.com/2026/04/23/2001-2006-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00/ This carburetor is set up with a proven baseline jetting configuration for performance and reliability on stock and lightly modified RM125 engines. This provides a strong starting point for most RM125 builds. Final tuning may be required depending on. TMX flatslide design for instant throttle response. Fully tunable jetting system. The flatslide design provides quicker […]]]>









This carburetor is set up with a proven baseline jetting configuration for performance and reliability on stock and lightly modified RM125 engines. This provides a strong starting point for most RM125 builds. Final tuning may be required depending on. TMX flatslide design for instant throttle response. Fully tunable jetting system. The flatslide design provides quicker slide response and a more direct throttle feel compared to worn stock carburetors. Clearance within your chassis. Depending on model year and condition of the boots, the intake boot and/or airbox boot may need to be softened or heated to ensure proper fitment and sealing. Type: Mikuni TMX Flatslide. Mikuni TMX 38mm Carburetor. 410 Main Jet (installed). 40 Pilot Jet (installed). Professional installation and proper jet tuning are recommended for optimal performance and engine safety. We specialize in performance carburetors and 2-stroke components.

]]> https://pwkcarburetorcarb.com/2026/04/23/2001-2006-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00/feed/ 0 https://pwkcarburetorcarb.com/2026/03/19/2001-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00/ https://pwkcarburetorcarb.com/2026/03/19/2001-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00/#comments Fri, 20 Mar 2026 04:20:43 +0000 https://pwkcarburetorcarb.com/2026/03/19/2001-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00/ This carburetor is set up with a proven baseline jetting configuration for performance and reliability on stock and lightly modified RM125 engines. This provides a strong starting point for most RM125 builds. Final tuning may be required depending on. TMX flatslide design for instant throttle response. Fully tunable jetting system. The flatslide design provides quicker […]]]>









This carburetor is set up with a proven baseline jetting configuration for performance and reliability on stock and lightly modified RM125 engines. This provides a strong starting point for most RM125 builds. Final tuning may be required depending on. TMX flatslide design for instant throttle response. Fully tunable jetting system. The flatslide design provides quicker slide response and a more direct throttle feel compared to worn stock carburetors. Clearance within your chassis. Depending on model year and condition of the boots, the intake boot and/or airbox boot may need to be softened or heated to ensure proper fitment and sealing. Type: Mikuni TMX Flatslide. Mikuni TMX 38mm Carburetor. 410 Main Jet (installed). 40 Pilot Jet (installed). Professional installation and proper jet tuning are recommended for optimal performance and engine safety. We specialize in performance carburetors and 2-stroke components.

]]> https://pwkcarburetorcarb.com/2026/03/19/2001-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00/feed/ 0 https://pwkcarburetorcarb.com/2026/02/28/yamaha-blaster-34mm-keihin-pwk-style-power-jet-replacement-carburetor-new-2/ https://pwkcarburetorcarb.com/2026/02/28/yamaha-blaster-34mm-keihin-pwk-style-power-jet-replacement-carburetor-new-2/#comments Sun, 01 Mar 2026 04:41:42 +0000 https://pwkcarburetorcarb.com/2026/02/28/yamaha-blaster-34mm-keihin-pwk-style-power-jet-replacement-carburetor-new-2/ Spare jets included for tuning!]]>






Spare jets included for tuning!

]]> https://pwkcarburetorcarb.com/2026/02/28/yamaha-blaster-34mm-keihin-pwk-style-power-jet-replacement-carburetor-new-2/feed/ 0 https://pwkcarburetorcarb.com/2026/02/24/2002-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00/ https://pwkcarburetorcarb.com/2026/02/24/2002-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00/#comments Wed, 25 Feb 2026 04:33:41 +0000 https://pwkcarburetorcarb.com/2026/02/24/2002-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00/ This carburetor is set up with a proven baseline jetting configuration for performance and reliability on stock and lightly modified RM125 engines. This provides a strong starting point for most RM125 builds. Final tuning may be required depending on. TMX flatslide design for instant throttle response. Fully tunable jetting system. The flatslide design provides quicker […]]]>









This carburetor is set up with a proven baseline jetting configuration for performance and reliability on stock and lightly modified RM125 engines. This provides a strong starting point for most RM125 builds. Final tuning may be required depending on. TMX flatslide design for instant throttle response. Fully tunable jetting system. The flatslide design provides quicker slide response and a more direct throttle feel compared to worn stock carburetors. Clearance within your chassis. Depending on model year and condition of the boots, the intake boot and/or airbox boot may need to be softened or heated to ensure proper fitment and sealing. Type: Mikuni TMX Flatslide. Mikuni TMX 38mm Carburetor. 410 Main Jet (installed). 40 Pilot Jet (installed). Professional installation and proper jet tuning are recommended for optimal performance and engine safety. We specialize in performance carburetors and 2-stroke components.

]]> https://pwkcarburetorcarb.com/2026/02/24/2002-suzuki-rm125-oem-replacement-mikuni-tmx38-38mm-carburetor-13200-36f00/feed/ 0 https://pwkcarburetorcarb.com/2025/12/20/yamaha-blaster-34mm-keihin-pwk-style-power-jet-replacement-carburetor-new/ https://pwkcarburetorcarb.com/2025/12/20/yamaha-blaster-34mm-keihin-pwk-style-power-jet-replacement-carburetor-new/#comments Sat, 20 Dec 2025 14:10:40 +0000 https://pwkcarburetorcarb.com/2025/12/20/yamaha-blaster-34mm-keihin-pwk-style-power-jet-replacement-carburetor-new/ Spare jets included for tuning!]]>






Spare jets included for tuning!

]]> https://pwkcarburetorcarb.com/2025/12/20/yamaha-blaster-34mm-keihin-pwk-style-power-jet-replacement-carburetor-new/feed/ 0 https://pwkcarburetorcarb.com/2025/12/10/yamaha-yz85-carburetor-carb-stock-replacement-28mm-pwk-keihin-pre-jetted-2/ https://pwkcarburetorcarb.com/2025/12/10/yamaha-yz85-carburetor-carb-stock-replacement-28mm-pwk-keihin-pre-jetted-2/#comments Wed, 10 Dec 2025 13:50:52 +0000 https://pwkcarburetorcarb.com/2025/12/10/yamaha-yz85-carburetor-carb-stock-replacement-28mm-pwk-keihin-pre-jetted-2/ This listing is for a new Keihin carb that is pre-jetted so it will require fine tuning according to the machine you have, any modifications, and altitude. Some spare Jets are included to help. If you need any help with recommended jetting specs feel free to message me at anytime.]]>










This listing is for a new Keihin carb that is pre-jetted so it will require fine tuning according to the machine you have, any modifications, and altitude. Some spare Jets are included to help. If you need any help with recommended jetting specs feel free to message me at anytime.

]]> https://pwkcarburetorcarb.com/2025/12/10/yamaha-yz85-carburetor-carb-stock-replacement-28mm-pwk-keihin-pre-jetted-2/feed/ 0