https://pwkcarburetorcarb.com Mon, 29 Jun 2026 03:48:46 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://pwkcarburetorcarb.com/2026/06/20/keihin-40mm-pwk-38-tapper-b-carburetor-for-suzuki-quadracer-lt500r-quadzilla-new/ https://pwkcarburetorcarb.com/2026/06/20/keihin-40mm-pwk-38-tapper-b-carburetor-for-suzuki-quadracer-lt500r-quadzilla-new/#comments Sat, 20 Jun 2026 07:54:48 +0000 https://pwkcarburetorcarb.com/2026/06/20/keihin-40mm-pwk-38-tapper-b-carburetor-for-suzuki-quadracer-lt500r-quadzilla-new/ This listing is for a Keihin 40MM PWK Style Carburetor, pilot jet is a 55, and main has a 160 jet. 46MM OD intake side, and 63MM bell housing side. Comes with spare jets, also a plastic idle screw kit.]]>




This listing is for a Keihin 40MM PWK Style Carburetor, pilot jet is a 55, and main has a 160 jet. 46MM OD intake side, and 63MM bell housing side. Comes with spare jets, also a plastic idle screw kit.

]]> https://pwkcarburetorcarb.com/2026/06/20/keihin-40mm-pwk-38-tapper-b-carburetor-for-suzuki-quadracer-lt500r-quadzilla-new/feed/ 0 https://pwkcarburetorcarb.com/2026/06/17/keihin-pwk38-38mm-carburetor-carb-for-honda-trx250r-cr250-atc250r-suzuki-lt250-11/ https://pwkcarburetorcarb.com/2026/06/17/keihin-pwk38-38mm-carburetor-carb-for-honda-trx250r-cr250-atc250r-suzuki-lt250-11/#comments Wed, 17 Jun 2026 07:46:39 +0000 https://pwkcarburetorcarb.com/2026/06/17/keihin-pwk38-38mm-carburetor-carb-for-honda-trx250r-cr250-atc250r-suzuki-lt250-11/ Keihin PWK38 38mm Carburetor Carb For Honda TRX250R CR250 ATC250R Suzuki LT250.]]>



Keihin PWK38 38mm Carburetor Carb For Honda TRX250R CR250 ATC250R Suzuki LT250.

]]> https://pwkcarburetorcarb.com/2026/06/17/keihin-pwk38-38mm-carburetor-carb-for-honda-trx250r-cr250-atc250r-suzuki-lt250-11/feed/ 0 https://pwkcarburetorcarb.com/2026/06/16/oem-suzuki-rm85-keihin-pwk-carburetor-carb-throttle-assembly-cable-13200-03b30/ https://pwkcarburetorcarb.com/2026/06/16/oem-suzuki-rm85-keihin-pwk-carburetor-carb-throttle-assembly-cable-13200-03b30/#comments Tue, 16 Jun 2026 19:45:48 +0000 https://pwkcarburetorcarb.com/2026/06/16/oem-suzuki-rm85-keihin-pwk-carburetor-carb-throttle-assembly-cable-13200-03b30/ Genuine OEM Suzuki RM85 Keihin Carburetor with Throttle Grip & Cable. This is an authentic, high-quality Made-in-Japan factory part, not a cheap aftermarket reproduction. Brand: Keihin (OEM Suzuki). Country of Manufacture: Japan. Suzuki Part Number: 13200-03B30. Included Components: Carburetor body, internal slide/needle, choke knob, fuel/vent lines, throttle cable, and throttle grip assembly. Please review the […]]]>



















Genuine OEM Suzuki RM85 Keihin Carburetor with Throttle Grip & Cable. This is an authentic, high-quality Made-in-Japan factory part, not a cheap aftermarket reproduction. Brand: Keihin (OEM Suzuki). Country of Manufacture: Japan. Suzuki Part Number: 13200-03B30. Included Components: Carburetor body, internal slide/needle, choke knob, fuel/vent lines, throttle cable, and throttle grip assembly. Please review the high-resolution photos carefully to assess the cosmetic and technical state. Body & Bowl: Clean aluminum casing, stamped with official “KEIHIN” and “KEIHIN JAPAN” logos. No cracks or stripped threads. Throttle Slide: The internal slide moves freely and smoothly within the tower. Lines: Standard vent hoses are attached. Throttle Grip & Cable: Includes a twist grip. Note: There is a small split in the rubber boot on the cable guide (visible in photos), but the inner wire pulls smoothly and functions as intended. Note: As with any used carburetor that has been in storage, it is recommended to clean and inspect the internal jets and float height to ensure it matches your specific setup and elevation before installation. Direct replacement for a 2005 Suzuki RM85. According to Suzuki parts catalogs, this factory part number (13200-03B30) fits RM85 models across a wide range of production years, but please double-check your bike’s compatibility before purchasing. If you have any questions or need additional photos, please feel free to ask!

]]> https://pwkcarburetorcarb.com/2026/06/16/oem-suzuki-rm85-keihin-pwk-carburetor-carb-throttle-assembly-cable-13200-03b30/feed/ 0 https://pwkcarburetorcarb.com/2026/06/14/keihin-28mm-pwk-carburetor-carb-for-ktm-65-85-sx-suzuki-rm65-rm80-rm85-rm85l-12/ https://pwkcarburetorcarb.com/2026/06/14/keihin-28mm-pwk-carburetor-carb-for-ktm-65-85-sx-suzuki-rm65-rm80-rm85-rm85l-12/#comments Sun, 14 Jun 2026 07:38:59 +0000 https://pwkcarburetorcarb.com/2026/06/14/keihin-28mm-pwk-carburetor-carb-for-ktm-65-85-sx-suzuki-rm65-rm80-rm85-rm85l-12/ Keihin Style 28mm PWK for Suzuki RM 80/80cc Dirt Bikes with power jet mod, will require tuning. Please let me know what your year and mods are so I can include the correct Jets needed for the application.]]>









Keihin Style 28mm PWK for Suzuki RM 80/80cc Dirt Bikes with power jet mod, will require tuning. Please let me know what your year and mods are so I can include the correct Jets needed for the application.

]]> https://pwkcarburetorcarb.com/2026/06/14/keihin-28mm-pwk-carburetor-carb-for-ktm-65-85-sx-suzuki-rm65-rm80-rm85-rm85l-12/feed/ 0 https://pwkcarburetorcarb.com/2026/06/07/1999-1996-2000-suzuki-rm125x-oem-keihin-pwk-carburetor-13200-36e30-clean/ https://pwkcarburetorcarb.com/2026/06/07/1999-1996-2000-suzuki-rm125x-oem-keihin-pwk-carburetor-13200-36e30-clean/#comments Sun, 07 Jun 2026 07:20:43 +0000 https://pwkcarburetorcarb.com/2026/06/07/1999-1996-2000-suzuki-rm125x-oem-keihin-pwk-carburetor-13200-36e30-clean/ This is a Keihin PWK carb from a 1999 Suzuki RM125X. It is in good overall condition. It is clean inside and ready to use. Suzuki part number is 13200-36E30. It MAY fit the following models. IF THE ITEM WAS DESCRIBED INCORRECTLY THEN I WILL R EFUND. I WILL ALWAYS TAKE CARE OF ANY ISSUE […]]]>









This is a Keihin PWK carb from a 1999 Suzuki RM125X. It is in good overall condition. It is clean inside and ready to use. Suzuki part number is 13200-36E30. It MAY fit the following models. IF THE ITEM WAS DESCRIBED INCORRECTLY THEN I WILL R EFUND. I WILL ALWAYS TAKE CARE OF ANY ISSUE THAT MAY COME UP. The internation al rate is a estimate only, the actual cost may be higher or lower, please ask for a quote. THE RATES LISTED MAY BE HIGHER OR LOWER THAN THE ACTUAL COST. I HAVE NO WAY OF KNOW HOW MUCH YOUR COUNTRY WILL CHARGE.

]]> https://pwkcarburetorcarb.com/2026/06/07/1999-1996-2000-suzuki-rm125x-oem-keihin-pwk-carburetor-13200-36e30-clean/feed/ 0 https://pwkcarburetorcarb.com/2026/06/06/keihin-38mm-pwk-airstriker-carburetor-for-suzuki-rm125-dirtbike-with-jet-kit/ https://pwkcarburetorcarb.com/2026/06/06/keihin-38mm-pwk-airstriker-carburetor-for-suzuki-rm125-dirtbike-with-jet-kit/#comments Sat, 06 Jun 2026 19:19:53 +0000 https://pwkcarburetorcarb.com/2026/06/06/keihin-38mm-pwk-airstriker-carburetor-for-suzuki-rm125-dirtbike-with-jet-kit/ The Air Striker design features directional intake fins that enhance airflow to the venturi, delivering stronger low-to-mid range response and reducing bogging under hard acceleration. The flat-slide design provides crisp throttle control and excellent top-end performance. This carburetor is a popular upgrade and replacement for many motocross and ATV models, including. Honda: CR125, CR250 especially […]]]>









The Air Striker design features directional intake fins that enhance airflow to the venturi, delivering stronger low-to-mid range response and reducing bogging under hard acceleration. The flat-slide design provides crisp throttle control and excellent top-end performance. This carburetor is a popular upgrade and replacement for many motocross and ATV models, including. Honda: CR125, CR250 especially 1999? 2000, CR500, TRX250R, ATC250R. Yamaha: YZ125, YZ250, YFZ350 Banshee (commonly used in pairs). KTM: 125 SX/EXC, 150 SX, 250 SX/EXC, 300 XC/EXC, 380/500 models (great upgrade from 2017+ Mikuni TMX). Kawasaki: KX125, KX250, KX500. Suzuki: RM125, RM250, RMX250, LT250R, Quadzilla LT500R. Key Dimensions for 38mm PWK Air Striker: Total Height: 165 mm (approx) Intake Diameter: 38 mm (Inner) / 46 mm (Outer) Air Filter Side: 62 mm (Inner) / 70 mm (Outer) Float Height: 16 mm. Carburetor comes ready for installation with baseline jetting and is easily tunable for your specific setup. Installed is a #170 main, and #55 pilot, I include a 172/175/178 along with 45/45/50 pilots for fine tuning.

]]> https://pwkcarburetorcarb.com/2026/06/06/keihin-38mm-pwk-airstriker-carburetor-for-suzuki-rm125-dirtbike-with-jet-kit/feed/ 0 https://pwkcarburetorcarb.com/2026/05/28/keihin-pwk-38mm-air-striker-carburetor-for-suzuki-rm125-pre-jetted-bolt-ongo-2/ https://pwkcarburetorcarb.com/2026/05/28/keihin-pwk-38mm-air-striker-carburetor-for-suzuki-rm125-pre-jetted-bolt-ongo-2/#comments Thu, 28 May 2026 19:01:45 +0000 https://pwkcarburetorcarb.com/2026/05/28/keihin-pwk-38mm-air-striker-carburetor-for-suzuki-rm125-pre-jetted-bolt-ongo-2/ The Air Striker design features directional intake fins that enhance airflow to the venturi, delivering stronger low-to-mid range response and reducing bogging under hard acceleration. The flat-slide design provides crisp throttle control and excellent top-end performance. This carburetor is a popular upgrade and replacement for many motocross and ATV models, including. Honda: CR125, CR250 especially […]]]>









The Air Striker design features directional intake fins that enhance airflow to the venturi, delivering stronger low-to-mid range response and reducing bogging under hard acceleration. The flat-slide design provides crisp throttle control and excellent top-end performance. This carburetor is a popular upgrade and replacement for many motocross and ATV models, including. Honda: CR125, CR250 especially 1999? 2000, CR500, TRX250R, ATC250R. Yamaha: YZ125, YZ250, YFZ350 Banshee (commonly used in pairs). KTM: 125 SX/EXC, 150 SX, 250 SX/EXC, 300 XC/EXC, 380/500 models (great upgrade from 2017+ Mikuni TMX). Kawasaki: KX125, KX250, KX500. Suzuki: RM125, RM250, RMX250, LT250R, Quadzilla LT500R. Key Dimensions for 38mm PWK Air Striker: Total Height: 165 mm (approx) Intake Diameter: 38 mm (Inner) / 46 mm (Outer) Air Filter Side: 62 mm (Inner) / 70 mm (Outer) Float Height: 16 mm. Carburetor comes ready for installation with baseline jetting and is easily tunable for your specific setup. Installed is a #170 main, and #55 pilot, I include a 172/175/178 along with 45/45/50 pilots for fine tuning.

]]> https://pwkcarburetorcarb.com/2026/05/28/keihin-pwk-38mm-air-striker-carburetor-for-suzuki-rm125-pre-jetted-bolt-ongo-2/feed/ 0 https://pwkcarburetorcarb.com/2026/05/25/1996-suzuki-rm125-rm-125-keihin-pwk-carburetor-carb-assy-38-mm-oem-13200-36e10/ https://pwkcarburetorcarb.com/2026/05/25/1996-suzuki-rm125-rm-125-keihin-pwk-carburetor-carb-assy-38-mm-oem-13200-36e10/#comments Mon, 25 May 2026 18:55:42 +0000 https://pwkcarburetorcarb.com/2026/05/25/1996-suzuki-rm125-rm-125-keihin-pwk-carburetor-carb-assy-38-mm-oem-13200-36e10/ Fitment: This is a. 1996 SUZUKI RM125 RM 125 KEIHIN PWK CARBURETOR CARB ASSY 38 MM OEM 13200-36E10. It should be interchangeable with many other years and models. WE ARE ONLY RESPONSIBLE FOR FITMENT ON THE BIKE WHICH THE PART CAME FROM. Please research with the dealer or an online source using the part number […]]]>





Fitment: This is a. 1996 SUZUKI RM125 RM 125 KEIHIN PWK CARBURETOR CARB ASSY 38 MM OEM 13200-36E10. It should be interchangeable with many other years and models. WE ARE ONLY RESPONSIBLE FOR FITMENT ON THE BIKE WHICH THE PART CAME FROM. Please research with the dealer or an online source using the part number to ensure it fits before purchasing. DESCRIPTION: You get exactly what is seen in the pictures… Please don’t forget this part is used, so it will NOT be perfect. I try to describe with plenty of pictures to the best of my ability. Before you leave bad feedback, please give us a chance to make it right! E are a small 100% disabled veteran owned business and we strive to make the customer happy! We do make mistakes…. But we ALWAYS make it right in the end… I ask for the opportunity to work with you if you have any issues. You are ordering and purchasing items from a motorcycle salvage yard, Not a motorcycle dealership. These parts may show wear and minor damage. Used parts may be missing bolts/brackets. These parts have been used, so please don’t expect them to be in brand-new condition. The product you are looking at is exactly what you get! Make sure both have a 100% exact look.

]]> https://pwkcarburetorcarb.com/2026/05/25/1996-suzuki-rm125-rm-125-keihin-pwk-carburetor-carb-assy-38-mm-oem-13200-36e10/feed/ 0 https://pwkcarburetorcarb.com/2026/05/25/2000-suzuki-rm250-oem-keihin-pwk-38-carb-carburetor-body-solenoid-13200-37e30/ https://pwkcarburetorcarb.com/2026/05/25/2000-suzuki-rm250-oem-keihin-pwk-38-carb-carburetor-body-solenoid-13200-37e30/#comments Mon, 25 May 2026 06:54:47 +0000 https://pwkcarburetorcarb.com/2026/05/25/2000-suzuki-rm250-oem-keihin-pwk-38-carb-carburetor-body-solenoid-13200-37e30/ Everything moves freely and smoothly. What you see is what you get. Needs to be cleaned or rebuilt. No cracks, breaks, or repairs.]]>

















Everything moves freely and smoothly. What you see is what you get. Needs to be cleaned or rebuilt. No cracks, breaks, or repairs.

]]> https://pwkcarburetorcarb.com/2026/05/25/2000-suzuki-rm250-oem-keihin-pwk-38-carb-carburetor-body-solenoid-13200-37e30/feed/ 0 https://pwkcarburetorcarb.com/2026/05/24/new-for-keihin-pwk28-rm65-rm85-carb-pwk-28-suzuki-rm-60-85-carburetor-with-kit/ https://pwkcarburetorcarb.com/2026/05/24/new-for-keihin-pwk28-rm65-rm85-carb-pwk-28-suzuki-rm-60-85-carburetor-with-kit/#comments Sun, 24 May 2026 18:53:47 +0000 https://pwkcarburetorcarb.com/2026/05/24/new-for-keihin-pwk28-rm65-rm85-carb-pwk-28-suzuki-rm-60-85-carburetor-with-kit/ Carburetor Carb With Kit For Keihin PWK28 RM65 RM85 PWK 28 For Suzuki RM 60 65 85. Fitment Type: Direct Replacement. 100% Brand New and High Quality. Inner Diameter 28 mm. Outer Diameter to Air Filter 49.5 mm. Outer Diameter to Intake 34.5 mm. High Quality And High Performance, It is Constructed From Robust, Premium […]]]>














Carburetor Carb With Kit For Keihin PWK28 RM65 RM85 PWK 28 For Suzuki RM 60 65 85. Fitment Type: Direct Replacement. 100% Brand New and High Quality. Inner Diameter 28 mm. Outer Diameter to Air Filter 49.5 mm. Outer Diameter to Intake 34.5 mm. High Quality And High Performance, It is Constructed From Robust, Premium Materials. Improves Throttle Responsiveness, Controls The Engine Speed. More Power Resolves Common Power Deficiencies. Air And Fuel Mixture is Perfectly Done, Helps the fuel to burn smoothly. 1x Carburetor With Kit. This is Aftermarket Replacement Item But Not. Please make sure the replacement part number matches the part you are replacing. And please check our photos for details and make sure the part shown looks identical to your stock one. This is a Soillar brand item. The logo in the pictures is unrelated to other brands and is for reference only. Communication is the best way to solve the problem. (except weekends & official holidays). We will be very honored to provide you with quality service. We will try our best to resolve any kind of issue.

]]> https://pwkcarburetorcarb.com/2026/05/24/new-for-keihin-pwk28-rm65-rm85-carb-pwk-28-suzuki-rm-60-85-carburetor-with-kit/feed/ 0