Results for category "banshee"

92 Articles
Banshee_350_Terry_Steel_Braided_Dual_Thumb_Throttle_Clutch_Cable_PWK_PJ_Carbs_01_roj

Banshee 350 Terry Steel Braided Dual Thumb Throttle & Clutch Cable PWK PJ Carbs

Banshee 350 Terry Steel Braided Dual Thumb Throttle & Clutch Cable PWK PJ Carbs
Banshee 350 Terry Steel Braided Dual Thumb Throttle & Clutch Cable PWK PJ Carbs
Banshee 350 Terry Steel Braided Dual Thumb Throttle & Clutch Cable PWK PJ Carbs
Banshee 350 Terry Steel Braided Dual Thumb Throttle & Clutch Cable PWK PJ Carbs

Banshee 350 Terry Steel Braided Dual Thumb Throttle & Clutch Cable PWK PJ Carbs
Banshee 350 Terry Steel Braided Dual Thumb Throttle & Clutch Cable PWK PJ Carbs. Brand New Terrycable Steel Braided Dual Carb Thumb Throttle Cable & Clutch Cable With Boot Yamaha Banshee 350. Years 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006. This thumb throttle cable from Terry Cable for your Yamaha Banshee is steel braided, which is far superior to a vinyl cable. It is designed for your stock or aftermarket thumb throttle assembly. It is brand new in the original packaging. Replaces OEM Part# 2GU-26260-02-00, 2GU-26335-00-00. This Cable Fits The Following Carb Models. 33-39mm Keihin PWK Carbs. BPRATV – The Best Parts. DO YOU NEED TO HAVE THIS ITEM INSTALLED ON YOUR VEHICLE? WE HAVE YOU COVERED! We are BPRATV, offering you the best in parts and service for over 20 years. PRICES AND LISTINGS ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE. Interchangeable part: We stock the same parts from different manufacturers so that when back orders occur, we have a part that is equal in quality and cost to send, preventing what can sometimes be long waits. This would be the only reason your order might vary slightly from the description, and the part that is subbed will always be comparable quality. If you only want a specific brand, just ask and we will let you know if it is out of stock and for how long. Once a part has been installed or prepped for installation it is no longer eligible for return. Over 99% of people in the world are not qualified to build an engine, and it is the responsibility of the person assembling and tuning the engine to make sure all the parts are correct and work properly. We ALWAYS STRONGLY recommend work be done by a qualified, experienced mechanic. Please work with us and we will ALWAYS work with you. No other parts nor any labor are included. We are BPRATV, and we offer a huge selection of Titanium fasteners. Once an item has been used or prepped for use with lubricants, sealant, etc. It is not eligible for return.
Banshee 350 Terry Steel Braided Dual Thumb Throttle & Clutch Cable PWK PJ Carbs
Banshee_Billet_Intake_Manifolds_Keihin_41mm_PWK_Pro_Series_Carbs_Dual_Manifold_01_ia

Banshee Billet Intake Manifolds Keihin 41mm PWK Pro Series Carbs Dual Manifold

Banshee Billet Intake Manifolds Keihin 41mm PWK Pro Series Carbs Dual Manifold
Banshee Billet Intake Manifolds Keihin 41mm PWK Pro Series Carbs Dual Manifold

Banshee Billet Intake Manifolds Keihin 41mm PWK Pro Series Carbs Dual Manifold
WORKS ON ALL YAMAHA BANSHEE MODELS AND YEARS. Billet dual intake manifolds. Stainless steel allen head bolts for mounting. Works on all 38mm to 41mm Keihin PWK carbs. Feel free to visit us on the web, give us a call, come in to our Upland, CA location. PRICES AND LISTINGS ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE. DO YOU MAKE A LIVING WORKING ON BIKES? ARE YOU A SHOP OR DEALER. PRICES ARE SUBJECT TO CHANGE AND LISTINGS MAY BE REVISED AT ANY TIME WITHOUT NOTICE. At BPRATV we sell parts from the best names in the industry, and we stock the same parts from different manufacturers so that when back orders occur we have an alternate part to send that is the same quality. This would be the ONLY reason your order might be slightly different when it arrives. 99% of problems can be easily solved without returning the entire order. Once items have been modified, installed, or used in any way they are not eligible for return. This product is NOT DIY. Over 99% of people in the world are not qualified to build an engine, and it is the responsibility of the person doing the work to ensure the parts work correctly. We ALWAYS STRONGLY recommend parts be installed by a qualified, experienced mechanic. Also, we want information from customers when their experience is less than desirable so we know what areas need improvement the most. Please work with us and we will ALWAYS work with you. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Air Intake & Fuel Delivery\Carburetors”. The seller is “bpratv” and is located in this country: US. This item can be shipped worldwide.
  • Brand: Yamaha Banshee 350 BPRATV
  • Engine Type: 2-Stroke
  • Machine Type: ATV
  • OE/OEM Part Number: 31K-16150-01-00
  • Manufacturer Warranty: 1 Year
  • Items Included: Billet aluminum intake manifolds, Rubber boots, Intake gaskets, Bolts, Hose clamps
  • Manufacturer Part Number: Intake34
  • Features: Get best banshee billet intake manifolds 35mm carbs
  • Barrel Count: 2
  • Performance Part: Yes

Banshee Billet Intake Manifolds Keihin 41mm PWK Pro Series Carbs Dual Manifold
Banshee_38mm_PWK_Billet_Intake_Manifolds_Keihin_Air_Striker_Carb_Dual_Two_Piece_01_bmb

Banshee 38mm PWK Billet Intake Manifolds Keihin Air Striker Carb Dual Two Piece

Banshee 38mm PWK Billet Intake Manifolds Keihin Air Striker Carb Dual Two Piece
Banshee 38mm PWK Billet Intake Manifolds Keihin Air Striker Carb Dual Two Piece

Banshee 38mm PWK Billet Intake Manifolds Keihin Air Striker Carb Dual Two Piece
WORKS ON ALL YAMAHA BANSHEE MODELS AND YEARS. Billet dual intake manifolds. Stainless steel allen head bolts for mounting. Works on all 36mm to 41mm Keihin, Mikuni, or Lectron carbs. Feel free to visit us on the web, give us a call, come in to our Upland, CA location. PRICES AND LISTINGS ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE. DO YOU MAKE A LIVING WORKING ON BIKES? ARE YOU A SHOP OR DEALER. PRICES ARE SUBJECT TO CHANGE AND LISTINGS MAY BE REVISED AT ANY TIME WITHOUT NOTICE. At BPRATV we sell parts from the best names in the industry, and we stock the same parts from different manufacturers so that when back orders occur we have an alternate part to send that is the same quality. This would be the ONLY reason your order might be slightly different when it arrives. 99% of problems can be easily solved without returning the entire order. Once items have been modified, installed, or used in any way they are not eligible for return. This product is NOT DIY. Over 99% of people in the world are not qualified to build an engine, and it is the responsibility of the person doing the work to ensure the parts work correctly. We ALWAYS STRONGLY recommend parts be installed by a qualified, experienced mechanic. Also, we want information from customers when their experience is less than desirable so we know what areas need improvement the most. Please work with us and we will ALWAYS work with you. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Air Intake & Fuel Delivery\Carburetors”. The seller is “bpratv” and is located in this country: US. This item can be shipped worldwide.
  • Brand: Yamaha Banshee 350 BPRATV
  • Engine Type: 2-Stroke
  • Machine Type: ATV
  • OE/OEM Part Number: 31K-16150-01-00
  • Manufacturer Warranty: 1 Year
  • Items Included: Billet aluminum intake manifolds, Rubber boots, Intake gaskets, Bolts, Hose clamps
  • Manufacturer Part Number: Intake34
  • Features: Get best banshee billet intake manifolds 35mm carbs
  • Barrel Count: 2
  • Performance Part: Yes

Banshee 38mm PWK Billet Intake Manifolds Keihin Air Striker Carb Dual Two Piece
Banshee_Keihin_39mm_PWK_Carb_Intake_Manifolds_Billet_Dual_Manifold_Pair_Boots_01_qo

Banshee Keihin 39mm PWK Carb Intake Manifolds Billet Dual Manifold Pair Boots

Banshee Keihin 39mm PWK Carb Intake Manifolds Billet Dual Manifold Pair Boots
Banshee Keihin 39mm PWK Carb Intake Manifolds Billet Dual Manifold Pair Boots

Banshee Keihin 39mm PWK Carb Intake Manifolds Billet Dual Manifold Pair Boots
WORKS ON ALL YAMAHA BANSHEE MODELS AND YEARS. Billet dual intake manifolds. Stainless steel allen head bolts for mounting. Works on all 38mm to 41mm Keihin PWK carbs. Feel free to visit us on the web, give us a call, come in to our Upland, CA location. PRICES AND LISTINGS ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE. DO YOU MAKE A LIVING WORKING ON BIKES? ARE YOU A SHOP OR DEALER. PRICES ARE SUBJECT TO CHANGE AND LISTINGS MAY BE REVISED AT ANY TIME WITHOUT NOTICE. At BPRATV we sell parts from the best names in the industry, and we stock the same parts from different manufacturers so that when back orders occur we have an alternate part to send that is the same quality. This would be the ONLY reason your order might be slightly different when it arrives. 99% of problems can be easily solved without returning the entire order. Once items have been modified, installed, or used in any way they are not eligible for return. This product is NOT DIY. Over 99% of people in the world are not qualified to build an engine, and it is the responsibility of the person doing the work to ensure the parts work correctly. We ALWAYS STRONGLY recommend parts be installed by a qualified, experienced mechanic. Also, we want information from customers when their experience is less than desirable so we know what areas need improvement the most. Please work with us and we will ALWAYS work with you. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Air Intake & Fuel Delivery\Carburetors”. The seller is “bpratv” and is located in this country: US. This item can be shipped worldwide.
  • Brand: Yamaha Banshee 350 BPRATV
  • Engine Type: 2-Stroke
  • Machine Type: ATV
  • OE/OEM Part Number: 31K-16150-01-00
  • Manufacturer Warranty: 1 Year
  • Items Included: Billet aluminum intake manifolds, Rubber boots, Intake gaskets, Bolts, Hose clamps
  • Manufacturer Part Number: Intake34
  • Features: Get best banshee billet intake manifolds 35mm carbs
  • Barrel Count: 2
  • Performance Part: Yes

Banshee Keihin 39mm PWK Carb Intake Manifolds Billet Dual Manifold Pair Boots
Banshee_Billet_Intake_Manifolds_38mm_39mm_41mm_Keihin_PWK_PWM_Carb_Twin_Pair_Set_01_xki

Banshee Billet Intake Manifolds 38mm 39mm 41mm Keihin PWK PWM Carb Twin Pair Set

Banshee Billet Intake Manifolds 38mm 39mm 41mm Keihin PWK PWM Carb Twin Pair Set
Banshee Billet Intake Manifolds 38mm 39mm 41mm Keihin PWK PWM Carb Twin Pair Set

Banshee Billet Intake Manifolds 38mm 39mm 41mm Keihin PWK PWM Carb Twin Pair Set
WORKS ON ALL YAMAHA BANSHEE MODELS AND YEARS. Billet dual intake manifolds. Stainless steel allen head bolts for mounting. Works on all 36mm to 41mm Keihin, Mikuni, or Lectron carbs. Feel free to visit us on the web, give us a call, come in to our Upland, CA location. PRICES AND LISTINGS ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE. DO YOU MAKE A LIVING WORKING ON BIKES? ARE YOU A SHOP OR DEALER. PRICES ARE SUBJECT TO CHANGE AND LISTINGS MAY BE REVISED AT ANY TIME WITHOUT NOTICE. At BPRATV we sell parts from the best names in the industry, and we stock the same parts from different manufacturers so that when back orders occur we have an alternate part to send that is the same quality. This would be the ONLY reason your order might be slightly different when it arrives. 99% of problems can be easily solved without returning the entire order. Once items have been modified, installed, or used in any way they are not eligible for return. This product is NOT DIY. Over 99% of people in the world are not qualified to build an engine, and it is the responsibility of the person doing the work to ensure the parts work correctly. We ALWAYS STRONGLY recommend parts be installed by a qualified, experienced mechanic. Also, we want information from customers when their experience is less than desirable so we know what areas need improvement the most. Please work with us and we will ALWAYS work with you. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Air Intake & Fuel Delivery\Carburetors”. The seller is “bpratv” and is located in this country: US. This item can be shipped worldwide.
  • Brand: Yamaha Banshee 350 BPRATV
  • Engine Type: 2-Stroke
  • Machine Type: ATV
  • OE/OEM Part Number: 31K-16150-01-00
  • Manufacturer Warranty: 1 Year
  • Items Included: Billet aluminum intake manifolds, Rubber boots, Intake gaskets, Bolts, Hose clamps
  • Manufacturer Part Number: Intake34
  • Features: Get best banshee billet intake manifolds 35mm carbs
  • Barrel Count: 2
  • Performance Part: Yes

Banshee Billet Intake Manifolds 38mm 39mm 41mm Keihin PWK PWM Carb Twin Pair Set
Banshee_Billet_Intake_Manifolds_33mm_34mm_35mm_Keihin_PWK_PWM_Carb_Twin_Pair_Set_01_uvxr

Banshee Billet Intake Manifolds 33mm 34mm 35mm Keihin PWK PWM Carb Twin Pair Set

Banshee Billet Intake Manifolds 33mm 34mm 35mm Keihin PWK PWM Carb Twin Pair Set
Banshee Billet Intake Manifolds 33mm 34mm 35mm Keihin PWK PWM Carb Twin Pair Set

Banshee Billet Intake Manifolds 33mm 34mm 35mm Keihin PWK PWM Carb Twin Pair Set
WORKS ON ALL YAMAHA BANSHEE MODELS AND YEARS. Billet dual intake manifolds. Stainless steel allen head bolts for mounting. Works on all 32mm to 35mm Keihin, Mikuni, or Lectron carbs. Feel free to visit us on the web, give us a call, come in to our Upland, CA location. PRICES AND LISTINGS ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE. DO YOU MAKE A LIVING WORKING ON BIKES? ARE YOU A SHOP OR DEALER. PRICES ARE SUBJECT TO CHANGE AND LISTINGS MAY BE REVISED AT ANY TIME WITHOUT NOTICE. At BPRATV we sell parts from the best names in the industry, and we stock the same parts from different manufacturers so that when back orders occur we have an alternate part to send that is the same quality. This would be the ONLY reason your order might be slightly different when it arrives. 99% of problems can be easily solved without returning the entire order. Once items have been modified, installed, or used in any way they are not eligible for return. This product is NOT DIY. Over 99% of people in the world are not qualified to build an engine, and it is the responsibility of the person doing the work to ensure the parts work correctly. We ALWAYS STRONGLY recommend parts be installed by a qualified, experienced mechanic. Also, we want information from customers when their experience is less than desirable so we know what areas need improvement the most. Please work with us and we will ALWAYS work with you. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Air Intake & Fuel Delivery\Carburetors”. The seller is “bpratv” and is located in this country: US. This item can be shipped worldwide.
  • Brand: Yamaha Banshee 350 BPRATV
  • Engine Type: 2-Stroke
  • Machine Type: ATV
  • OE/OEM Part Number: 31K-16150-01-00
  • Manufacturer Warranty: 1 Year
  • Items Included: Billet aluminum intake manifolds, Rubber boots, Intake gaskets, Bolts, Hose clamps
  • Manufacturer Part Number: Intake34
  • Features: Get best banshee billet intake manifolds 35mm carbs
  • Barrel Count: 2
  • Performance Part: Yes

Banshee Billet Intake Manifolds 33mm 34mm 35mm Keihin PWK PWM Carb Twin Pair Set
Banshee_28mm_28_mil_PWK_Style_Carbs_Carb_Carburetors_Billet_Intake_Manifolds_Set_01_sjml

Banshee 28mm 28 mil PWK Style Carbs Carb Carburetors Billet Intake Manifolds Set

Banshee 28mm 28 mil PWK Style Carbs Carb Carburetors Billet Intake Manifolds Set

Banshee 28mm 28 mil PWK Style Carbs Carb Carburetors Billet Intake Manifolds Set
WORKS ON ALL YAMAHA BANSHEE MODELS AND YEARS. THE CARBS IN THIS LISTING ARE NOT GENUINE KEIHIN CARBS. THEY WILL WORK IF YOU KNOW HOW TO TUNE. IF YOU WANT THE QUALITY YOU GET FROM A KEIHIN CARB PLEASE SEE OUR OTHER LISTINGS FOR THE REAL THING. 28mm PWK “Style” carbs. One Piece billet intake manfiold with internal crossover. Intake boots with clamps. We stock the exact same parts from different companies so that when back orders occur we have an alternate part to send that is the same quality. This would be the ONLY reason your order might be slightly different when it arrives. We have bulk pricing available for every item we sell. Just let us know how many you need! Please check your order completely right when you receive it and let us know immediately if there is an issue. This way we can fix it for your ASAP. Parts that do not meet these requirements are not refundable. We stand behind all parts we sell 100%. We ALWAYS STRONGLY recommend parts be installed by a qualified, experienced mechanic. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Air Intake & Fuel Delivery\Air Filters”. The seller is “bpratv” and is located in this country: US. This item can be shipped worldwide.
  • Brand: Yamaha Banshee 350 ATV
  • Type: Carburetor
  • Machine Type: ATV
  • Manufacturer Warranty: Yes
  • Items Included: Banshee 28mm pwk style carbs, Banshee billet intake manifolds, Banshee intake gaskets
  • Manufacturer Part Number: 016-039A 016-150SA
  • Featured Refinements: Banshee Motor
  • Material: Billet
  • Diameter: 28mm
  • Part Type: Carburetor

Banshee 28mm 28 mil PWK Style Carbs Carb Carburetors Billet Intake Manifolds Set
Banshee_28mm_28_mil_Genuine_Keihin_PWK_Carbs_Complete_Dual_Carburetor_Intake_Kit_01_otx

Banshee 28mm 28 mil Genuine Keihin PWK Carbs Complete Dual Carburetor Intake Kit

Banshee 28mm 28 mil Genuine Keihin PWK Carbs Complete Dual Carburetor Intake Kit
Banshee 28mm 28 mil Genuine Keihin PWK Carbs Complete Dual Carburetor Intake Kit
Banshee 28mm 28 mil Genuine Keihin PWK Carbs Complete Dual Carburetor Intake Kit
Banshee 28mm 28 mil Genuine Keihin PWK Carbs Complete Dual Carburetor Intake Kit

Banshee 28mm 28 mil Genuine Keihin PWK Carbs Complete Dual Carburetor Intake Kit
WORKS ON ALL BANSHEE MODELS AND YEARS 28mm GENUINE KEIHIN carbs. Billet intake manifolds with rubber boots. Intake gaskets for manifold. K&N style hi flow air filters. Steel braided Terrycable thumb throttle cable. Jet kit with needle. Item is brand new. THESE CARBS ARE NOT GENUINE KEIHIN CARBS. IF YOU WANT THE PERFORMANCE THAT COMES WITH REAL KEIHIN CARBS SEE OUR OTHER LISTINGS FOR A HIGHER PRICE. Feel free to visit us on the web, give us a call, come in to our Upland, CA location. PRICES AND LISTINGS ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE. DO YOU MAKE A LIVING WORKING ON BIKES? ARE YOU A SHOP OR DEALER. PRICES ARE SUBJECT TO CHANGE AND LISTINGS MAY BE REVISED AT ANY TIME WITHOUT NOTICE. At BPRATV we sell parts from the best names in the industry, and we stock the same parts from different manufacturers so that when back orders occur we have an alternate part to send that is the same quality. This would be the ONLY reason your order might be slightly different when it arrives. 99% of problems can be easily solved without returning the entire order. Once items have been modified, installed, or used in any way they are not eligible for return. This product is NOT DIY. Over 99% of people in the world are not qualified to build an engine, and it is the responsibility of the person doing the work to ensure the parts work correctly. We ALWAYS STRONGLY recommend parts be installed by a qualified, experienced mechanic. Also, we want information from customers when their experience is less than desirable so we know what areas need improvement the most. Please work with us and we will ALWAYS work with you. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Intake & Fuel Systems\Carburetors & Throttlebodies”. The seller is “bpratv” and is located in this country: US. This item can be shipped worldwide.
  • Modified Item: Yes
  • Custom Bundle: Yes
  • Type: Carburetor
  • Manufacturer Part Number: 016-144 016.144 RU-1780 YAM35001THS 002-053
  • Modification Description: get complete 28mm banshee dual carb kit
  • Placement on Vehicle: Rear, Lower
  • Brand: Yamaha Banshee 350 Keihin UPP Terrycable BPRATV
  • Warranty: 1 Year
  • Bundle Description: get best banshee 28mm carb kit complete

Banshee 28mm 28 mil Genuine Keihin PWK Carbs Complete Dual Carburetor Intake Kit
Banshee_28mm_28_mil_PWK_Style_Carb_Kit_Complete_Carburetor_Billet_Intake_Kit_01_hgnr

Banshee 28mm 28 mil PWK Style Carb Kit Complete Carburetor Billet Intake Kit

Banshee 28mm 28 mil PWK Style Carb Kit Complete Carburetor Billet Intake Kit
Banshee 28mm 28 mil PWK Style Carb Kit Complete Carburetor Billet Intake Kit
Banshee 28mm 28 mil PWK Style Carb Kit Complete Carburetor Billet Intake Kit

Banshee 28mm 28 mil PWK Style Carb Kit Complete Carburetor Billet Intake Kit
WORKS ON ALL BANSHEE MODELS AND YEARS 28mm PWK “Style” carbs (see below). Billet intake manifolds with rubber boots. Intake gaskets for manifold. K&N style hi flow air filters. Steel braided Terrycable thumb throttle cable. Jet kit with needle. Item is brand new. THESE CARBS ARE NOT GENUINE KEIHIN CARBS. IF YOU WANT THE PERFORMANCE THAT COMES WITH REAL KEIHIN CARBS SEE OUR OTHER LISTINGS FOR A HIGHER PRICE. Feel free to visit us on the web, give us a call, come in to our Upland, CA location. PRICES AND LISTINGS ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE. DO YOU MAKE A LIVING WORKING ON BIKES? ARE YOU A SHOP OR DEALER. PRICES ARE SUBJECT TO CHANGE AND LISTINGS MAY BE REVISED AT ANY TIME WITHOUT NOTICE. At BPRATV we sell parts from the best names in the industry, and we stock the same parts from different manufacturers so that when back orders occur we have an alternate part to send that is the same quality. This would be the ONLY reason your order might be slightly different when it arrives. 99% of problems can be easily solved without returning the entire order. Once items have been modified, installed, or used in any way they are not eligible for return. This product is NOT DIY. Over 99% of people in the world are not qualified to build an engine, and it is the responsibility of the person doing the work to ensure the parts work correctly. We ALWAYS STRONGLY recommend parts be installed by a qualified, experienced mechanic. Also, we want information from customers when their experience is less than desirable so we know what areas need improvement the most. Please work with us and we will ALWAYS work with you. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Intake & Fuel Systems\Carburetors & Throttlebodies”. The seller is “bpratv” and is located in this country: US. This item can be shipped worldwide.
  • Modified Item: Yes
  • Custom Bundle: Yes
  • Type: Carburetor
  • Manufacturer Part Number: 016-144 016.144 RU-1780 YAM35001THS 002-053
  • Modification Description: get complete 28mm banshee dual carb kit
  • Placement on Vehicle: Rear, Lower
  • Brand: Yamaha Banshee 350 Keihin UPP Terrycable BPRATV
  • Warranty: 1 Year
  • Bundle Description: get best banshee 28mm carb kit complete

Banshee 28mm 28 mil PWK Style Carb Kit Complete Carburetor Billet Intake Kit