Results for tag "pre-jetted"

25 Articles
Keihin_28mm_PWK_Carburetor_For_Suzuki_RM85_2003_2025_Pre_Jetted_Tuned_Jets_01_at

Keihin 28mm PWK Carburetor For Suzuki RM85 2003-2025 Pre-Jetted Tuned + Jets

Keihin 28mm PWK Carburetor For Suzuki RM85 2003-2025 Pre-Jetted Tuned + Jets
Keihin 28mm PWK Carburetor For Suzuki RM85 2003-2025 Pre-Jetted Tuned + Jets
Keihin 28mm PWK Carburetor For Suzuki RM85 2003-2025 Pre-Jetted Tuned + Jets

Keihin 28mm PWK Carburetor For Suzuki RM85 2003-2025 Pre-Jetted Tuned + Jets
Suzuki RM85 28mm PWK Carburetor. Professionally Tuned – Bolt-On Ready – Fits 2002 & Newer. This is not a generic shelf carb. Each unit is personally inspected, adjusted, and configured by me so it arrives bolt-on ready for a stock or near-stock RM85. ? Professionally Prepared Setup. Jetting selected and installed for RM85 applications? Float height checked and set correctly? Air screw preset for crisp throttle response? Slide and internal components inspected? Ready to install and ride. These are tuned for. While minor fine-tuning may be required depending on elevation, temperature, fuel type, or aftermarket exhaust, this carburetor is pre-configured to run properly on a standard 2002+ RM85 setup. Compatible with stock throttle cable. Fits factory intake boot and air boot (2002 & newer models). Please verify intake boot condition prior to installation. ? What’s Included. 1x Professionally Tuned 28mm PWK Carburetor. Installed performance jetting setup. There are plenty of inexpensive carburetors online. The difference is preparation. I personally configure these so you are not starting from scratch. That means easier starting, smoother throttle response, and better performance right out of the box. If you want a carburetor that’s been set up with experience – not guesswork – this is the one. Please read the entire listing before purchasing. Detailed fitment information, specifications, measurements, compatible years/models, and installation notes are provided in the description. Please compare your existing part and measurements before ordering. We’re happy to help.
Keihin 28mm PWK Carburetor For Suzuki RM85 2003-2025 Pre-Jetted Tuned + Jets
28mm_PWK_Carburetor_Kawasaki_KX85_2001_2024_Pre_Jetted_Tuned_Bolt_On_01_raki

28mm PWK Carburetor Kawasaki KX85 2001-2024 Pre-Jetted Tuned Bolt On

28mm PWK Carburetor Kawasaki KX85 2001-2024 Pre-Jetted Tuned Bolt On
28mm PWK Carburetor Kawasaki KX85 2001-2024 Pre-Jetted Tuned Bolt On
28mm PWK Carburetor Kawasaki KX85 2001-2024 Pre-Jetted Tuned Bolt On

28mm PWK Carburetor Kawasaki KX85 2001-2024 Pre-Jetted Tuned Bolt On
Kawasaki KX85 28mm PWK Carburetor. Professionally Tuned – Bolt-On Ready – Fits 2001-Present. With a professionally prepared 28mm PWK carburetor that is jetted and tuned before it leaves my shop. This is NOT a generic warehouse carburetor. Each unit is personally inspected, adjusted, and configured so it arrives bolt-on ready for a stock or near-stock KX85. ? Professionally Set Up for KX85. Jetting selected and installed specifically for KX85 applications? Float height checked and properly adjusted? Air screw preset for crisp throttle response? Slide operation inspected? Ready to install and ride. These are set up for. Strong low-end throttle response. Clean, hard top-end pull. While minor fine-tuning may be required depending on elevation, temperature, fuel type, or aftermarket exhaust systems, this carb is configured to run correctly on a standard 2001+ KX85 setup. Compatible with stock throttle cable. Fits factory intake and air boot (2001-Present KX85 models). KX85-II (Big Wheel models). Please confirm intake boot condition prior to installation. ? What’s Included. 1x Professionally Tuned 28mm PWK Carburetor. Installed performance jetting setup. There are many inexpensive carburetors available online. The difference here is setup and experience. I personally configure the jetting so you’re not guessing during installation. That means easier starting, cleaner throttle response, and better rideability right out of the box. If you want a properly prepared carburetor instead of a random preset unit, this is the one.
28mm PWK Carburetor Kawasaki KX85 2001-2024 Pre-Jetted Tuned Bolt On
Keihin_PWK_38mm_Air_Striker_Carburetor_For_Suzuki_RM125_Pre_Jetted_Bolt_On_Go_01_npay

Keihin PWK 38mm Air Striker Carburetor For Suzuki RM125 Pre-Jetted Bolt On/Go

Keihin PWK 38mm Air Striker Carburetor For Suzuki RM125 Pre-Jetted Bolt On/Go
Keihin PWK 38mm Air Striker Carburetor For Suzuki RM125 Pre-Jetted Bolt On/Go
Keihin PWK 38mm Air Striker Carburetor For Suzuki RM125 Pre-Jetted Bolt On/Go
Keihin PWK 38mm Air Striker Carburetor For Suzuki RM125 Pre-Jetted Bolt On/Go
Keihin PWK 38mm Air Striker Carburetor For Suzuki RM125 Pre-Jetted Bolt On/Go
Keihin PWK 38mm Air Striker Carburetor For Suzuki RM125 Pre-Jetted Bolt On/Go
Keihin PWK 38mm Air Striker Carburetor For Suzuki RM125 Pre-Jetted Bolt On/Go
Keihin PWK 38mm Air Striker Carburetor For Suzuki RM125 Pre-Jetted Bolt On/Go

Keihin PWK 38mm Air Striker Carburetor For Suzuki RM125 Pre-Jetted Bolt On/Go
The Air Striker design features directional intake fins that enhance airflow to the venturi, delivering stronger low-to-mid range response and reducing bogging under hard acceleration. The flat-slide design provides crisp throttle control and excellent top-end performance. This carburetor is a popular upgrade and replacement for many motocross and ATV models, including. Honda: CR125, CR250 especially 1999? 2000, CR500, TRX250R, ATC250R. Yamaha: YZ125, YZ250, YFZ350 Banshee (commonly used in pairs). KTM: 125 SX/EXC, 150 SX, 250 SX/EXC, 300 XC/EXC, 380/500 models (great upgrade from 2017+ Mikuni TMX). Kawasaki: KX125, KX250, KX500. Suzuki: RM125, RM250, RMX250, LT250R, Quadzilla LT500R. Key Dimensions for 38mm PWK Air Striker: Total Height: 165 mm (approx) Intake Diameter: 38 mm (Inner) / 46 mm (Outer) Air Filter Side: 62 mm (Inner) / 70 mm (Outer) Float Height: 16 mm. Carburetor comes ready for installation with baseline jetting and is easily tunable for your specific setup. Installed is a #170 main, and #55 pilot, I include a 172/175/178 along with 45/45/50 pilots for fine tuning.
Keihin PWK 38mm Air Striker Carburetor For Suzuki RM125 Pre-Jetted Bolt On/Go
Yamaha_Banshee_YFZ350_28mm_PWK_Keihin_Aftermarket_Carbs_Pre_Jetted_Set_01_yk

Yamaha Banshee YFZ350 28mm PWK Keihin Aftermarket Carbs Pre-Jetted Set

Yamaha Banshee YFZ350 28mm PWK Keihin Aftermarket Carbs Pre-Jetted Set
Yamaha Banshee YFZ350 28mm PWK Keihin Aftermarket Carbs Pre-Jetted Set
Yamaha Banshee YFZ350 28mm PWK Keihin Aftermarket Carbs Pre-Jetted Set
Yamaha Banshee YFZ350 28mm PWK Keihin Aftermarket Carbs Pre-Jetted Set

Yamaha Banshee YFZ350 28mm PWK Keihin Aftermarket Carbs Pre-Jetted Set
Yamaha Banshee 350 Keihin 28mm Aftermarket PWK Dual Carb Kit. I have already tuned them for a good starting point for a mostly stock machine with pipes, and open air box at sea level. Designed to improve throttle response, midrange pull, and top-end performance over stock carburetors. Perfect for stock engines, aftermarket pipes, mild port work, and dune/trail setups. Complete Kit Includes. (2) Keihin PWK 28mm Carburetors (Matched Pair). Jet Kit for tuning adjustments. Everything you need for a proper dual-carb upgrade. Engine Side Spigot OD: 35mm. Air Filter Side OD: 49mm. Slide Type: Flat Slide. Fuel Inlet: Brass barb fitting. Dual Carb Configuration (required for Banshee). Crisp throttle response? Stronger mid-to-top RPM power? Improved fuel atomization? Easier tuning vs stock carbs? Great for trail, dune, and aggressive sport riding. Compatible with stock intake boots and most aftermarket intakes. Jetting adjustments may be required depending on exhaust, reeds, elevation, and engine modifications. Fine tuning required for optimal performance.
Yamaha Banshee YFZ350 28mm PWK Keihin Aftermarket Carbs Pre-Jetted Set
Yamaha_Blaster_28MM_Carburetor_Keihin_PWK_Pre_Jetted_01_bg

Yamaha Blaster 28MM Carburetor Keihin PWK Pre-Jetted

Yamaha Blaster 28MM Carburetor Keihin PWK Pre-Jetted
Yamaha Blaster 28MM Carburetor Keihin PWK Pre-Jetted
Yamaha Blaster 28MM Carburetor Keihin PWK Pre-Jetted
Yamaha Blaster 28MM Carburetor Keihin PWK Pre-Jetted
Yamaha Blaster 28MM Carburetor Keihin PWK Pre-Jetted
Yamaha Blaster 28MM Carburetor Keihin PWK Pre-Jetted
Yamaha Blaster 28MM Carburetor Keihin PWK Pre-Jetted

Yamaha Blaster 28MM Carburetor Keihin PWK Pre-Jetted
Yamaha Blaster 200 Keihin PWK 28mm Carb Carburetor 016.144 29SB0. This listing is for a new Keihin 28mm PWK Style carburetor which includes the proper jets for running an aftermarket exhaust with open air box lid, if you have other mods or need additional jets other than what is supplied message me. I would be more than happy to give you detailed instructions pertaining to your specific modifications! IMPORTANT The fitment of this carburetor will require you to heat up the intake boot, and modify the air box side. Also the carburetor bowl may hit the clutch arm so it’s suggested to use a reed spacer or slightly tilt the carburetor.
Yamaha Blaster 28MM Carburetor Keihin PWK Pre-Jetted